JumpSport 120 Assembly & Installation Manual page 23

Pole 3
14)
The net between poles 1 and 3 should now look like the above pictures (but the pictures will only match if your net tied off to
pole 1 instead of pole 8). For a top down view, see page 27.
Bottom
strap of net
1ft
bungee
Ref. #11
15)
Starting at pole 2 and working clockwise around trampoline, pull bottom of net down pole, so that bottom strap of net is
positioned below bottom of pole foam. Wrap a 1ft bungee around bottom strap of net, then around trampoline leg, and connect ends
of bungee together under trampoline frame. Ignore red marks on bottom strap if there are any.
>> Repeat at all other poles, continuing to work clockwise around trampoline.
Assembly and Installation Instructions–Type
Pole 2
23
Pole 2
B Installation
Pole 1