Philips Saeco Intelia Service Manual page 18

INTELIA
The machine is programming
the amount of milk to be
dispensed in order to prepare
a Latte Macchiato.
The machine is programming
the amount of coffee to be
brewed in order to prepare a
Latte Macchiato.
Brewing of a cup of
"AMERICANO".
Brewing of a cup of
"BABY CAPPUCCINO".
Insert the water dispensing
spout and press the
dispensing. Press "
exit.
Warning signals (Yellow Colour)
The machine is warming up
to brew coffee and other
products and to dispense hot
water.
The Brew Group is being
reset due to machine reset.
The machine is performing
the rinse cycle.
Wait until the machine stops
the operation.
The
"INTENZA+"
fi lter to be replaced.
Insert the milk carafe and
press the "
clean the carafe.
Press"
If this page is displayed after starting the machine, this means that the descaling
cycle is needed. Press the "
the relevant section. Press the "
bear in mind that failure to descale your machine will prevent it from working
properly. Repair is not covered by warranty.
Saeco International Group
" "button to start the
machine needs
" button to
" to exit.
" to
the
" button to enter the descaling menu and refer to
" button to go on using the machine. Please
Rev. 03
03 USER INSTRUCTIONS
Insert the milk carafe and press
the " " button to start the
brewing and save.
Press " " to exit.
Brewing of a cup of
"LIGHT ESPRESSO".
Hot water dispensing.
Insert the milk carafe and press
the " " button to start the
brewing.
Press" " to exit.
The machine is warming up to
brew a product that is currently
being programmed.
Prime the circuit.
The machine reminds you to
insert the carafe before going on
with the descaling cycle.
04
Page / 10