Nikon COOLPIX 570 User Manual page 205

NOTE:
The illustrations in this guide are from Windows Vista. Depending on your
operating system, the dialogs displayed during installation may differ from
those shown here.
1
Turn on the computer and insert the Software Suite installer CD into the CD-
ROM drive.
Windows Vista
Choose Run Welcome.exe in the AutoPlay dialog to start the Install Center program.
Proceed to step 3.*
WindowsXP
The Install Center program will start automatically. Proceed to step 3.*
*
If the Install Center Program does not start automatically, choose Computer (Windows
Vista) or My Computer (Windows XP) from the Start menu, and double-click the
SoftwareSuite CD icon.
MacOSX
The Software Suite folder will open automatically. Double-click the Welcome icon.
If the folder does not open automatically, double-click on the Software Suite CD icon
on the desktop.
2
Enter the administrator name and password, and then click
OK
(Macintosh
only).
3
Choose a language and click Next.
If the desired language is not displayed, click Region
Selection to choose a different region and then choose
the desired language.
The Software Suite installer dialog will be displayed.
~
If Nikon Transfer or ViewNX is Already Installed
The language selection dialog will not be displayed if Nikon Transfer or ViewNX has
already been installed. The Install Center window is displayed in the language selected
when Nikon Transfer or ViewNX was first installed.
Installing the Supplied Software Applications