Nikon COOLPIX 570 User Manual page 198

Step
3
Charge the Battery
Use the supplied Charging AC Adapter EH-68P and USB Cable UC-E6 to charge the
battery inserted into the camera.
3.1
Prepare the Charging AC Adapter EH-68P.
If a plug
adapter~
is included, attach the plug adapter to the
plug on the Charging AC Adapter. Push the plug adapter firmly until
it is securely held in place. Once the two are connected, attempting
to forcibly remove the plug adapter could damage the product.
*
The shape of the plug adapter varies according to the country or
region in which the camera was purchased.
For Customers in Argentina
If the camera was purchased in Argentina, a plug adapter is not
supplied. Proceed to step 3.2.
EH-68P (AR)
3.2
Be sure that the power-on lamp and the monitor are off.
Be sure to insert the battery into the camera and turn off the camera
(OJ
11).
3.3
Use the supplied USB
cable to connect the
Charging AC Adapter
to the camera.
3.4
Plug the Charging AC Adapter into an
electrical outlet.
The power-on lamp slowly blinks orange to
indicate that the battery is charging.
Charging is complete when the power-on
lamp turns off.
About four hours are required to charge a
fully exhausted battery.
3.5
Disconnect the Charging AC Adapter from the electrical outlet and then
disconnect the USB cable.
..... Pages 18-20 of the
User's Manual
,~
..".'.'.":
~:>,
j}
First Steps