Changing Methods - Epson EB-4955WU User Manual

Adjusting Projected Images

Changing methods

Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
Aspect Mode
Auto Projects in an appropriate aspect ratio based on
information from the signal being input.
Projects while retaining the aspect ratio of the input image.
Normal
Projects at an aspect ratio of 4:3.
4:3
16:9 Projects at an aspect ratio of 16:9.
Full Projects at the full size of the projected screen.
Projects by enlarging the input image to the full width of
Zoom
the projected screen while retaining the aspect ratio. Areas
that exceed the edges of the projected screen are not
projected.
Native Projects to the center of the projected screen at the
resolution of the input image. Areas that exceed the edges
of the projected screen are not projected.
Explanation
a
• You can also set the aspect ratio from the Configuration menu.
s Signal - Aspect
• If parts of the computer image are missing, set the Resolution
setting to Wide or Normal from the Configuration menu, according
to the resolution of the computer.
s Signal - Resolution
The aspect mode changes as shown in the tables below.
The following colors in screen images in the tables indicate areas that are
not displayed.
: The area where the image is not displayed depending on the screen
type setting.
: The area where the image is not displayed depending on the aspect
mode setting.
EB-4955WU/EB-4950WU/EB-4855WU/EB-4850WU/EB-4750W
Screen type setting: 16:10
16:10
Auto or Normal
16:9
Full
p.75
p.75
Aspect Ratio of Input Signal
16:9 4:3
46