Miele DG 1450 Operating Instructions Manual page 32

Cleaning and care
After descaling:
32
Descaling will now begin. The colon will flash and the k
symbol will now light up constantly in the display.
It is only possible to cancel the descaling process during the
first minute. After that the process cannot be cancelled.
Do not switch the appliance off during the descaling
process. If it is switched off before the end of the process,
the whole process will have to be started from the
beginning again.
An audible tone will sound and the p symbol will start
flashing ten minutes before the end of the descaling process.
The water container needs to be filled with fresh water.
^ Remove the water container and empty it. Remove the
insert.
^ Rinse the water container and the insert thoroughly.
^ Replace the insert and fill the water container with 1 litre of
fresh tap water. Push the water container into the appliance
until it connects.
The flashing p symbol will go out and the k symbol will start
flashing.
^ Touch "OK" to continue the programme.
The colon will start flashing and the k symbol will now light
up constantly.
An audible tone will sound when the descaling process has
been completed.
^ Switch off the appliance.
^ Open the door.
^ Remove the water container and empty it.
^ Dry the appliance thoroughly.
^ Make sure the appliance is completely dry before closing
the door.