Cub Cadet Tank SZ Operator's Manual page 24

Standard set-up
Stems (Dandelion, Bahia,
Buckhorn, etc.)
Very Lush &/or tall grass
Low cut height (1 to 2")
Mulch
Material collection
Abrasive (sandy), dry
Wet
Table Notes: This table is a general outline of suggested settings, mowing conditions may vary.
Inner Baffle: The inner baffle regulates grass discharge. Remove the inner baffle for high-volume grass and install the inner baffle for
precision cutting.
Discharge Baffle: The discharge baffle enhances the grass discharge pattern. The discharge baffle reduces clumping and should be
removed for mulching.
Gauge Wheels: The gauge wheels reduce scalping, help with precision cutting and reduce turf defacement during turns.
Rear Rollers: The rear rollers reduce scalping and gives grass a striped appearance.
Cutting Blades: The cutting blades cut grass, create grass lift and discharge grass through the discharge chute.
Discharge Chute: The discharge chute controls the mower deck discharge and enhances the discharge pattern
NOTE: To avoid damaging grass, no more than 1⁄3 of the grass height should be removed during a single cutting (i.e. if the grass is 6"
tall, cut it to 4").
24 S 5— o
ection peration
Reconfigurable Mower
Discharge
Inner Baffle Baffle
Installed Installed
Removed Installed
Removed Installed
Installed Installed
Installed Removed
Installed Installed
Removed Installed
Installed Installed
Cutting Gauge
Blades Wheels
Hi-lift Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to
Low-lift
2-1⁄2"
High = 1 to
2-1⁄2"
Hi-lift/Mulch
Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to
2-1⁄2"
Low-lift
Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
Front Roller Rear Rollers
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to
High = 1 to
2-1⁄2"
2-1⁄2"
Low = 3 to 5"
Low = 3 to 5"