Using Playback Mode - Digimerge DNR300 Series Instruction Manual

3. Check Search.
Select alarm type
Check Search
Select NVR and channel
Enter start and end time
Click Search
4. Under Device, select the NVR you would like to search.
5. Under Start Time and End Time, enter the start and end times for your search.
6. Click Search. A list of relevant alarms appears below.

Using Playback Mode

You can view recorded footage from your NVR's in the CMS software.
To use playback mode:
1. Click Playback (
2. Under Device, select the NVR and channel you would like to search.
Select search
parameters
Click Search
• Check Multiple channel to playback video from multiple cameras. Select camera and then
click Add. Repeat to add additional cameras.
3. Under Parameter, select the start and end time for the search.
4. Click Search.
).
Select Channel
Select NVR
47