Digimerge DNR300 Series Instruction Manual page 104

Appendix C: Auto Port Forwarding Wizard
Router drop-down list
Enable Silent Mode
Router IP
Router user name &
password
2. Under Router IP, click the Detect Router IP button (
• The router's IP populates in the blank field. Click OK to exit the prompt.
3. Under Username and Password, enter
• Optional: Under HTTP Type (default http://) and HTTP Port (default, 80), you may have to
change the values depending on your router model. Consult your router manual for details.
4. Under IP, enter the IP address of your device.
NOTE: The IP is usually found in the information window of your NVR.
5. Under Port, enter the NVR's HTTP Port (by default, port 80).
6. Under 2nd Port, enter the NVR's Client Port (by default, port 35000).
7. Click Next to continue.
94
35000
the router's
Enter your device's IP
Search and Auto detect
button
).
username and password.
35000
80 and
Enter ports
35000
under Ports
Enter port
numbers