Using The System; Password; On-Screen Display - Digimerge DNR300 Series Instruction Manual

USING THE SYSTEM

The default system password is 000000

Password

By default, the login password is enabled. The default system password is 000000.

On-Screen Display

The system shows the following for all display views:
1
2
3
1. Display Area:
• Double-click on a channel to view in full-screen; double-click again to return to split screen.
• Right-click to open the Quick Menu. See "Using the Quick Menu" on page 8.
• Left-click to open the Navigation Bar.
• Move the mouse to the top of a channel to view the Camera Toolbar.
• Click-and-drag cameras to rearrange the channel display. This does not affect the channels
each camera is connected or recording to.
2. Channel Name
3. Channel Status Icons:
• : Channel is recording.
• : Motion has been detected.
• : Camera is locked (covert mode is activated).
Using the System
7