Connecting The 8240Hd To An Hdtv With An Hdmi Connector - Cisco Explorer 8240HD User Manual

Connecting the explorer 8240hd digital video recorder
Table of Contents

Advertisement

Connecting the 8240HD to an HDTV With an
HDMI Connector
Explorer 8240HD DVR
THIS DEVICE IS INTENDED TO BE ATTACHED
TO A RECEIVER THAT IS NOT USED TO
RECEIVE OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS DEVICE
CABLE
IN ANY OTHER FASHION MAY CAUSE
IN
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS AND IS IN VIOLATION
OF THE FCC RULES, PART 15.
CATV CONVERTER
MADE IN MEXICO
Back of HDTV
Cable Input
WARNING: Electric shock hazard! Unplug all electronic devices before connecting
or disconnecting any device cables to the 8240HD.
Important Note Regarding the HDMI Interface on the 8240HD
The HDMI interface will automatically confi gure the audio output for a format supported by the
television. Because not all TVs support a Dolby Digital input, the HDMI interface may automatically
select a 2-channel stereo audio confi guration instead of Dolby Digital. When the output is
confi gured for 2-channel audio, this confi guration is carried over to the other digital audio outputs
of the 8240HD. This confi guration prevents your home theater system or Dolby Digital decoder
from providing the full Dolby Digital surround sound eff ect.
On the 8240HD, you may override the automatic selection of audio by the HDMI interface by
completing the following steps.
1. Press SETTINGS twice on the remote control to open the General Settings menu.
2. Press MOVE UP or MOVE DOWN to select the option Audio: Digital Out.
3. Press MOVE RIGHT to select Dolby Digital. This setting will send Dolby Digital audio to the
HDMI, DIGITAL AUDIO OUT, and OPTICAL AUDIO OUT connectors on the 8240HD.
Note: If the TV (video/audio monitor) connected to the 8240HD using HDMI is not Dolby Digital
capable, it may not produce audio through its speakers when the Audio: Digital Out setting on
the 8240HD is set to Dolby Digital. You can either switch the Audio: Digital Out setting back to
HDMI when you are not using the home theater or Dolby Digital decoder, or you can connect the
baseband audio outputs (OUT 1 Audio Left and Right) to the TV.
CABLE
OUT
OUT 1
OUT 2
Pr
A
U
D
Pb
L
I
O
R
VIDEO
DIGITAL
VIDEO
Y/V
AUDIO OUT
S-VIDEO
VIDEO
Y
VIDEO
L/
P
L
B
MONO
L/
MONO
AUDIO
AUDIO
R
P
R
R
R
HD 1
IN
IN
OUT
IR
OPTICAL
AUDIO
OUT
1394
SATA
S - VIDEO
OUT
AUDIO
HDMI
CENTER
CHANNEL IN
ON
OFF
AUDIO IN
DVI/HDCP
R
L
ANT (75 )
Y
ANT-1
P
L
B
AUDIO
P
R
OUT
R
HD 2
ANT-2
IN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
1394
120 VAC
120 VAC
60HZ 5A
60HZ 80W
LISTED 14H1
CABLE EQUIP.
11

Advertisement

Table of Contents
loading

Table of Contents