Table of Contents
Advertisement
INSTALLATION OF NATURAL GAS REGULATOR
1. The Natural Gas regulator has been factory installed. Attach the PVC
Gas Hose to the regulator (See drawing below).
2. Adjust the brass elbow so that it is pointing down.
3. Connect the other end of the PVC Gas Hose to the house gas line using
the quick-connect fitting.
14 1/2 in.(36.83cm)
9
12 in.(30.48cm)
Two 10 sq. in. openings
(Minimum).
Both ends at 180 degree
5 in.(12.7cm)
Advertisement
Table of Contents
