Declaration Of Conformity; Supplementary Information - Fujitsu SPARC Enterprise T5120 Safety And Compliance Manual

Compliance Model Number:
Product Family Name:
EMC
USA—FCC Class A
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference that may cause undesired operation.
European Union
This equipment complies with the following requirements of the EMC Directive 2004/108/EEC:
As Information Technology Equipment (ITE) Class A per (as applicable):
EN 55022:2006
EN 61000-3-2:2000 +A2:2005
EN 61000-3-3:1995 +A1:2001
EN 55024:1998 +A1:2001 +A2:2003 Required Limits:
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-8
IEC61000-4-11
Safety
This equipment complies with the following requirements of the Low Voltage Directive2006/95/EC:
EC Type Examination Certificates:
EN 60950-1:2001, 1st Edition
IEC 60950-1:2001, 1st Edition
Evaluated to all CB Countries
UL 60950-1:2003, CSA C22.2 No. 60950-03

Supplementary Information

This product was tested and complies with all the requirements for the CE Mark.
This equipment complies with the Restriction of Hazardous Substances (RoHS) directive 2002/95/EC.

Declaration of Conformity

HU1
SPARC Enterprise T5120
Class A
Pass
Pass
4 kV (Direct), 8 kV (Air)
3 V/m
1 kV AC Power Lines, 0.5 kV Signal and DC Power Lines
1 kV AC Line-Line and Outdoor Signal Lines, 2 kV AC Line-Gnd, 0.5 kV DC Power Lines
3 V
1 A/m
Pass
Certificate No. US/11738/UL
CB Scheme Certificate No. US/11733/UL
File: E138989 Vol. 59 Sec.
xxvii