Base Unit Dimensions⎯50Sz024- -030 - Carrier 50SZ Series Product Data

BASE UNIT DIMENSIONS⎯50SZ024- -030
REQUIRED CLEARANCE TO COMBUSTIBLE MATL.
(Refer to Maximum Operating Clearances)
TOP OF UNIT...................................................................................14.00 [355.6]
DUCT SIDE OF UNIT.........................................................................2.00 [50.8]
SIDE OPPOSITE DUCTS ................................................................14.00 [355.6]
BOTTOM OF UNIT .............................................................................0.50 [12.7]
NEC. REQUIRED CLEARANCES.
BETWEEN UNITS, POWER ENTRY SIDE ....................................42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00 [914.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE.........................42.00 [1066.8]
ELECTRICAL
UNIT
CHARACTERISTICS
50SZ024 208/230- -1- -60
50SZ030 208/230- -1- -60, 208/230- -3- -60
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
INCHES [mm] EVAP. COIL ACCESS SIDE............................................................36.00 [914.0]
POWER ENTRY SIDE....................................................................42.00 [1066.8]
(EXCEPT FOR NEC REQUIREMENTS)
UNIT TOP .......................................................................................48.00 [1219.2]
SIDE OPPOSITE DUCTS ..............................................................36.00 [914.0]
DUCT PANEL .................................................................................12.00 [304.8] *
*MINIMUM DISTANCES: IF UNIT IS PLACED LESS THAN 304.8 [12.00] FROM
WALL SYSTEM, THEN SYSTEM PERFORMANCE MAYBE COMPROMISE.
INCHES [mm]
UNIT HEIGHT
UNIT WEIGHT
IN. [MM]
"A"
lb kg
343 156 39.02 [991]
366 166 41.02 [1042]
7
CENTER OF GRAVITY
IN. [MM]
X Y
20.0 [508] 19.3 [490]
20.0 [508] 14.0 [356]
INCHES [mm]
A05162
Z
17.6 [447]
13.0 [330]