Nokia N97 mini Service Manual page 24

Rm-553, rm-555

Hide thumbs Also See for N97 mini:

Table of Contents

2. If 3 touches were successfully detected, you will see this screen.

If you feel you did not press the "+" points correctly, select "Cancel" to start over.

The calibration data is not written to the phone memory until you press "Next"

Select "Next" to finalize the recalibration, then Close the next box

You can perform this recalibration again if needed.

To ensure the calibration data is written properly to memory, you must change the phone to RF-

Inactive mode.

Switch the phone to RF-Inactive, and wait until the phone boots to the home screen.

5. Verify that the touch panel is working correctly.



a Verify that the Send and End keys are working properly



Start the Menu > Applications > Drawing application, and check that lines are drawn

as expected, and that they follow the tip of the SS-93/stylus. Check also that lines can

be drawn to the edges (within 1-2mm) of the screen.

Nokia N97 mini

RM-553 / RM-555

Service Manual Level 1&2

Version 1.0

ISSUE 1

Table of Contents

N97 mini