Nokia N97 mini Service Manual page 16

25) Now detach the other end of the READER FPC
fixed to the HEAT SINK ASSY adhesive using the SS-
93. The READER FPC cannot be reused.
27) Use the dental tool to remove the two SCREW
CAPS. Be aware of the sharp point of the dental tool!
Be careful not to injure yourself!
29) Start releasing the A-cover assembly with the
SRT-6 as shown.
16
26) Use SS-93 again to detach the HEAT SINK ASSY
adhesive. Do not use it again. The HEAT SINK ASSY
adhesive has to be renewed also.
28) Unscrew the two Torx+ size 4 screws in the
order shown. Do not use them again. Discard them.
30) Carefully lift up the assembly to gain access to
the A-COVER ASSY connector. Use the SS-93 to open
the connector. Be careful not to damage the
connector or any nearby components!
Confidential  Copyright © 2009 NOKIA  All rights reserved
Nokia N97 mini
RM-553 / RM-555
Service Manual Level 1&2
Version 1.0 ISSUE 1