Nokia N97 mini Service Manual page 13

7) Slide the phone open. Release the QWERTY PRTD
with the SRT-6 as shown. The QWERTY PRTD cannot
be reused. Discard it.
9) To release the B-COVER close the slide and insert
the SRT-6 between the hinge assembly and the B-
COVER. While detaching the B-cover, be careful not
to touch the engine board.
11) Then release the clips around the volume key.
13
8) Unscrew the two TORX+ size 4 screws in the order
shown. Discard the screws.
10) First release the clips around the camera button.
12) Carefully slide the phone open. Use the SRT-6 to
release the remaining clips holding the B-COVER.
Remember not to touch the engine board.
Confidential  Copyright © 2009 NOKIA  All rights reserved
Nokia N97 mini
RM-553 / RM-555
Service Manual Level 1&2
Version 1.0 ISSUE 1