JVC KD-AVX40 Instructions Manual page 65

Dvd/cd receiver
Hide thumbs Also See for KD-AVX40:
Table of Contents

Advertisement

• Sound signals emitted through the rear terminals
Through the analog terminals (Speaker outlLlNEOUT)
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT (optical) terminal
Digital signals (linear PCM, Dolby Digital and MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or adecoder
compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly.
(1t'F
page 54)
• DTS sound cannot be emitted.
48 kHz, 16 bits stereo linear PCM
48 kHz, 16 bits
Dolby Digital bitstream
stereo linear PCM
48 kHz, 16 bits stereo linear PCM
MPEG bitstream
44.1 kHz, 16 bits stereo linear PCM /
48 kHz, 16 bits stereo linear PCM
48 kHz, 16 bits
Dolby Digital bitstream
stereo linear PCM
32/44.1/48 kHz, 16 bits linear PCM
32/44.1/48 kHz, 16 bits linear PCM
44.1 kHz, 16 bits linear PCM
*
Digital signals may be emitted at20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal ifthe discs
are notcopy-protected.
65
REFERENCES

Advertisement

Table of Contents
loading

Table of Contents