JVC KD-AVX40 Instructions Manual page 55

Touch Pad-LCD: Light up when your finger touches the controls.
Monitor
Always lights.
Touch pad controls
Lights up when your hand
moves close to the controls.
Always lights.
Proxi/Motion-LCD: Light up when your hand moves close to the
controls.
Proximity/Motion:
Normal:
Touch Pad: Lights up when yourfinger Always lights.
touches the controls.
Initialize all settings you have made in
~.
Hold
~
/
II,
then
reset the unit.
1&
[3]
You can turn off the touch pad controls and monitor lights while turning
on the unit.
1&
[5]
. ",;1
~~;r~onnecting
an external component to the CD changer jack on the
:_~
'i
Changer/iPod*6: CD changer or iPod
IJ&
[39,40]
' : (, External Input: Any other than the above.
1&
[48]
• For connecting KS-SRA1OO/XMDJVCl 00, this setting is not required. It
is automatically detected.
:, Off: Cancels.
, On: Activates the key-touch tone.
Off: Cancels.
;
..
;
,,"'
Mutingl, Muting2: Select either one which mutes the sounds while
using the cellular phone.
'"';"/;:'j:;lj Selectable settings, [reference page]
*1
Selectable only for "Disc" and "USB." (Playback stops when you select one ofthe items.)
*2
Appears only when aSIRIUS Satellite Radio is connected.
*3
Not selectable when "A VInput" is selected as the source.
*4
The REVERSE GEAR SIGNAL lead connection is required
1&
"lnstallationlConnection Manual." The rear view through
the camera appears on the monitor in "Full" aspect ratio (regardless ofthe aspect ratio setting) when you shift the
gear to the reverse (R) position.
*5
Not selectable when the component connected to the CD changerjack is selected as the source.
*6
The name ofthe component detected through the CD changerjack is shown.
*
7 The TEL MUTING lead connection is required.
1&
"Installation/Connection Manual."
55
SETTINGS