Table of Contents
Advertisement
8
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
Your Monitor set supports Plug & Play*.
y
y
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
DC-IN /
D-SUB
RGB OUT
When using a D-Sub signal input cable
y
y
connector for Macintosh
Mac adapter
y
y
HDMI
Connect the signal
y
y
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen
y
y
with your finger for a
long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
y
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin high
density (3 row) D-SUB VGA connector on the
supplied cable to a 15 pin 2 row connector.
CAUTION
Advertisement
Table of Contents
