Table of Contents
Advertisement
6
ASSEMBLING AND PREPARING
Setting up the Monitor set
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
DC-IN /
3
Press Power button on the Stand base of the
Monitor set to turn the power ON.
CAUTION
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
10 cm
10 cm
Do not touch or press the screen when
adjusting the angle of the monitor.
Tilt from +12 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
WARNING
NOTE
- 5
12
DC-IN /
Front
Rear
Advertisement
Table of Contents
