Carrier 50EJQ Installation, Start-Up And Service Instructions Manual page 4

NOTES:
1. Weights include economizer (Std)
2. Center of gravity.
3. Do not locate adjacent units with discharge facing econo-
mizer inlet. Minimum clearances to be:
Adjacent Units: 15 -0
Top of Units: No overhang
Outdoor Coil: 4 -0
Economizer Side: 6 -0
Filter Access Side: 10 -0 (for removal of evaporator
coil)
4. For smaller service and operational clearances, con-
tact Carrier Application Engineering department.
5. Dimensions are in inches. Dimensions in [ ] are in
millimeters.
6. For units equipped with electric heat, a field-supplied
90° elbow must be installed in the supply ductwork be-
low the unit discharge.
7. For side-supply/return applications, a single return and
supply ductwork connection is recommended for cov-
ering both return and both supply openings.
Fig. 3 — Base Unit Dimensions, 50EWQ024 and 028
OPERATING
UNIT SIZE
WEIGHT
50EWQ
(lb)
ft-in.
024 4168 5-7
028 4168 5-7
4
CORNER WEIGHT
A B
(lb)
ft-in. 1 2 3
3 ⁄ 3-7 5 ⁄ 843 859 1245
8 8
3 ⁄ 3-7 5 ⁄ 843 859 1245
8 8
4
1222
1222