Changing The Print Quantity - FujiFilm nexia Owner's Manual

SHIFT DATE
w
SHIFT DATE
q

CHANGING THE PRINT QUANTITY

This is convenient when one has forgotten to set the
print quantity before exposure, or when one does not
want a print because of an exposure failure.
✻
Overwriting is not possible if the cartridge is
removed midway or the batteries are removed
after exposure.
Select the required print quantity from the sequence
Fig. 65
available in [PRINT QUANTITY] and then continue to
press the SHIFT button. (Refer to Fig.60 – 64.)
Hold down the SHIFT button q (with the print
Fig. 66
quantity blinking on the LCD) and press the
mark on the multi-operation button w for 1 or more
consecutive seconds.
42