Table of Contents
Advertisement
3
Basic Operations
3.1 Making a Call
3.1.1 Making a Domestic Call
Method: (After you pick up the handset or press HANDFREE key)
Area code (when making a long distance call)
number
CALL/REDIAL key
You can clear the last number by press "CLR" key. Call status will be
displayed when the network is connected, and there will be a prompt if the
put-through tone is set as on. Please refer to paragraph 4.9.3 "Call setting",
get the information of put-through tone.
If the call is over, hang up or hook on the receiver, and then press
key to return to the idle state.
3.1.2 Dialing PSTN's Extensions
Method 1: (After you pick up the handset or press HANDFREE key)
Dial the exchange number and then the extension.
Method 2: Add pause character "P" (holding # key to enter "p") be-
tween exchange number and extension number, and then your phone will
dial the extension automatically.
Area code
ber
CALL/REDIAL key
An example of using pause character "P":
8880000 P 6666 P 8888.
After the first part of this number is replied, 6666 will be automatically
dialed and the second pause character will generate a delay of 5 seconds
before 8888 is sent. (The first P indicates the pending put-through, and the
latter P stands for the 5-second delay.)
3.1.3 Making IDD
Method: (After you pick up the handset or press HANDFREE key)
+ Country code
DIAL key.
Before you make an international distance call, hold the * key until
your screen displays the prefix symbol "+" of an international call.
Exchange number
Complete telephone number
14
telephone
P
Extension num-
CALL/RE-
Advertisement
Table of Contents
