Ethernet Cables; Working With Sas Cables; Mini-Sas Cable - IBM System Storage DS3300 Installation, User's, And Maintenance Manual

Ethernet cables

The DS3300 supports industry-standard Category 5e and Category 6 shielded and
unshielded Ethernet cables for all iSCSI data ports and the management port.
To avoid damage or data transmission problems, consider the following precautions:
v When you route the cable along a folding cable-management arm, leave enough
v Route the cable away from places where it can be damaged by other devices in
v Do not put excess weight on the cable at the connection point. Make sure that
v Do not route the cable parallel to power cables, unless you are using shielded

Working with SAS cables

Each DS3300 RAID controller has one x4 multilane SAS port for connecting to drive
expansion enclosures.
Use a 1M or 3M (1-meter or 3-meter) SAS cable with a mini-SAS 4x multilane SAS
connector on each end to connect a controller host port to a host HBA and to
connect the drive expansion port to a storage expansion enclosure.
The following illustration shows the 1M and 3M mini-SAS cable.
Figure 14. Mini-SAS cable
The 1M and 3M SAS cables have a universal key connector that enables the cable
to be used in all mini-SAS ports.
24
System Storage DS3300 Storage Subsystem: Installation, User's, and Maintenance Guide
slack in the cable.
the rack cabinet.
the cable is well supported.
cables.
Mini-SAS
connectors
Blue plastic tab