Selecting The Equipment Connected To The Hdmi Input; Delaying Audio Output And Synchronizing It With Video Output; Returning Settings To Conditions Upon Factory Settings; Function) - Panasonic SA-XR57 Operating Instructions Manual

See page 30 for receiver operations.
Selecting the equipment
connected to the HDMI
input terminal
• You set the connected
equipment as a DVD
recorder or DVD player
through these steps.
Reducing standby
power consumption
(power saving standby
mode)
Setting ADVANCED
DUAL AMP functions off
Listening comfortably at
low volume
• Change this setting to listen
to software recorded with
Dolby Digital at low volume
(such as late at night)
maintaining audio clarity. It
reduces the peak level in
loud scenes without
affecting the sound field.
Switching the attenuator
• Switch the attenuator on when
sounds become distorted while
playing an analogue input source
and the sign "OVERFLOW "
appears on the display.
Delaying audio output and
synchronizing it with video output
• Correct the time difference by
delaying audio output when sounds
and pictures do not match.
Returning settings to
conditions upon factory
settings (Reset function)
• Re-enter settings to your
liking when necessary.
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select the equipment connected to the HDMI
input terminal and confirm the choice.
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select and confirm the choice.
• The volume of consumed power becomes 0.35 W if you select "OFF ".
• The standby through function (á page 5) becomes unavailable
when you make HDMI connections.
• HDAVI Control (á page 19) does not function when the unit is off.
1 Select and confirm the choice.
2 Select and confirm the choice.
1 Select and confirm the choice.
2 Select a setting and confirm the choice.
Note
This function does not work when disc data does not support it.
1 Select and confirm the choice.
2 Select and confirm the choice.
To cancel, select "OFF ".
1 Select and confirm the choice.
2 Select and confirm the choice.
1 Select and confirm the choice.
2 Select and confirm the choice.
To cancel, select "NO ".
Note
When you select "YES ", the input source becomes TUNER
(Preset Channel 1). (Preset radio stations will not be erased.)
DVR : When the connected
equipment is a DVD
recorder
DVD : When the connected
equipment is a DVD
player
Factory setting: DVR
OFF : When you wish to
reduce standby power
consumption
ON : When the standby
power consumption
level is normal
Factory setting: ON
OFF :Advanced dual amp functions
are off in this setting.
AUTO :Advanced dual amp
functions are on in
this setting.
Factory setting: AUTO
OFF : The software is played with
the original dynamic range
STANDARD : The level
recommended by
the producer of the
software for
household viewing
MAX : The maximum allowable
compression (recommended
for night viewing)
Factory setting: OFF
OFF : off ON : on
Factory setting: OFF
OFF :Normal setting
ON : Setting for delaying
audio output
Factory setting: OFF
YES : Choice for resetting
NO : Choice against
resetting
33
RQT8552