Alto PBM8.350 UM User Manual page 6

PBM8.350 UM
8
3
8
8 8
8 8
8
8 8
8
8 8
8
8 8
8
8 8
8
8 8
8
8 8
8
8 8
8
6. INSTALLA TION AND CONNECTION
6.3 System Connection for Live Sound Application
Reading the "QUICK START" chapter and previous setting procedures , you will
know how to start your system quickly and adjust the channel setting.
Following page picture shows the PBM8.350 UM standard connections for a
live set.
Connect three or more microphones to mono MIC channels (1~3); connect
keyboards or signal processors to either line input of stereo channel 7~8 or
line input of mono channel; connect the CD player to line input of mono or
stereo channel; other stereo line signal source can be connected to line input
of channel 9~10.
You can connect either an external amplifier or active speaker to the monitor
output jack. Using the main output jacks on front panel, you can connect an
external power amplifier
or 2 active speakers. Besides, you can connect a pair of headphone to
headphone output jack. On the rear panel, there are powered mix output
connectors , you can connect to these powered connectors 2 passive
speakers.
You can use the AUX1 output jack to connect a powered stage monitor, or the
stage monitor external power amp.
If needed, you can also use the 2-track in/out connectors to connect the DAT
or cassette for recording.
to driving the 1 or 2 sub-woofers
20