Ec- -Declaration Of Conformity (Applies To Europe Only) - Husqvarna 128LDX Operator's Manual

Model 128LDX (M10 LH arbor shaft thread)
Approved accessories
Trimmer head
Plastic blades
Attachments
Grass blade/grass cutter kit
Cultivator attachment with shaft
Edger attachment with shaft
Blower attachment with shaft
Pruner attachment with shaft
Clean sweep attachment with shaft
Hedge trimmer attachment with shaft
Trimmer attachment
DECLARATION OF CONFORMITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46- -36- -146000, as authorised
representative in the Community, declare that the grass trimmer model Husqvarna 128LDX
from serial numbers 2009- -031N00001 and onwards (the year is clearly stated on the rating
plate, followed by the serial number), comply with the requirements of the COUNCIL'S
DIRECTIVES:
of 22 June 1998 "relating to machinery" 98/37/EC, annex IIA;
of 15 December 2004 "relating to electromagnetic compatibility" 2004/108/EC, and applicable
supplements; and
of 8 May 2000 "relating to the noise emissions in the environment" in accordance with Annex
V of 2000/14/EC. The measured sound power is 110 dB(A), the guaranteed sound power is
114 dB(A). The cutting width is 43 cm.
The following standards have been applied:EN12100- - 1:2003, EN 12100- - 2:2003, EN ISO
11806:1997 and CISPR 12:2005.
SMP, The Swedish Machinery Testing Institute, Fyrisborgsgatan 3 S- -754 50 Uppsala,
Sweden, has carried out voluntary type approval. The certificate(s) are numbered:
SEC/07/1156.
09- -01- -31
545196777 Rev. 2 4/30/09
TECHNICAL DATA
Type Cutting attachment / guard, part. no.
T25 537 33 83- -02 / 545 030 901
Tricut 300 mm 531 00 38- -11 / 545 030 901
Part. no.
952 715 616
952 711 907 / 537 42 54- -01
952 711 908 / 537 19 69- -01
952 711 911
952 711 910 / 537 18 33- -16
537 19 67- -01
537 19 66- -05 / 537 19 66- -06
537 35 35- -01
Ronnie E. Goldman, Director of Engineering
Handheld Consumer Products
English--- 22