Specifications - Behringer Ultra-Voice VX2000 User Manual

As a standard, the BEHRINGER ULTRA-VOICE VX2000 is equipped with electronically servo-balanced inputs
and outputs–except for the insert connectors. The circuit design features automatic hum and noise reduction
for balanced signals and thus allows for trouble-free operation, even at the highest operating levels. Externally
induced mains hum, etc. will be effectively suppressed. The automatic servo-function recognizes the presence
of unbalanced connectors and adjusts the nominal level internally to avoid level differences between the input
and output signals (6-dB correction).
+
Please ensure that only qualified persons install and operate the VX2000. During installation
and operation the user must have sufficient electrical contact to earth. Electrostatic charges
might affect the operation of the unit.

8. SPECIFICATIONS

FREQUENCY RESPONSE
Line In to Main Out
(bypass mode)
DISTORTION
MIC -> Ins Send
Line -> Ins Send
NOISE (absolute) A-weighted
Main Out bal.
Recording Out
INPUT LEVEL (max.)
Mic In
Line In
OUTPUT LEVEL (max.)
Main Out bal.
Main Out unbal.
Recording Out
Insert Send
POWER SUPPLY
Mains voltage
Power consumption
Fuse
Mains connector
PHYSICAL (H x W x D)
WEIGHT
SHIPPING WEIGHT
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
illustrated.
ULTRA-VOICE VX2000
10 Hz to 200 kHz; +0 / -1.6 dB
< 0.02 % / -30 dBu in / 30 dB Gain
< 0.002 % / 0 dBu in / Unity
-98 dBu
-100.5 dBu
+11.5 dBu
+22 dBu
+22 dBu
+22 dBu
+22 dBu
+22 dBu
U.S./Canada
U.K./Australia
Europe
General export model
20 W max.
100 - 120 V ~: T 630 mA H
200 - 240 V ~: T 315 mA H
Standard IEC receptacle
1 ¾" (44.5 mm) x 19" (482.6 mm) x 8 ½" (217 mm)
approx. 3 kg
approx. 4.2 kg
8. SPECIFICATIONS
120 V ~, 60 Hz
240 V ~, 50 Hz
230 V ~, 50 Hz
100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
15