Table of Contents
Advertisement
When you view the Source list, the device name and the input port will be
displayed together.
− If you have connected a PC to the
cable, select PC from the device name list.
− If you have connected a PC to the
to DVI cable, select DVI PC from the device name list.
− If you connected an AV device to the
HDMI to DVI cable, select DVI Devices from the device name list.
Information: View detailed information about the connected devices.
Refresh: Select if a connected device does not appear in the list. If the list
does not show the device after you select Refresh, check the status of the
TV-to-device connection.
Remove USB: Remove the USB device from the list safely. This function is
only available when the USB device selected.
Universal Remote Setup: Use to confi gure universal remote control settings.
Using the universal remote control, you can control external devices connected
to the TV, such as a set-top box, Blu-ray player, and AV receiver.
HDMI IN 2 (DVI)
port with an HDMI
HDMI IN 2 (DVI)
port with an HDMI
HDMI IN 2 (DVI)
port with an
English - 16
Universal Remote Setup
This TV has a universal remote control feature that lets you control cable
boxes, Blu-ray players, home theaters, and other third-party external devices
connected to the TV using the TV's remote control.
Insert the IR Extender's plug into the IR Out port on the One Connect. Place
the other end of the IR Extender (the Transmitter) no more than 2 inches from
the external device. Face the IR Extender's transmitter toward the external
device's remote control signal receiver. Note that there should be no obstacles
between the IR Extender and the external device. Any obstacles will interfere
with the transmission of the remote control signal.
2 inches
Advertisement
Table of Contents
