Download Print this page

Samsung S9C Quick Start Manual

Hide thumbs Also See for S9C:

Advertisement

S9C
Attach the TV to
Connect video
the Stand
devices
Step
Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1
Attach the TV to the Stand
1A
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
1E
1G
1I

QUICK START

GUIDE
BN68-05357A-03
Power on and
Using the Smart
start the initial
Touch Control
setup
Step
Step
2
3
Open the package, and remove the cushioning.
Remove the TV from the box. Then, remove
the top and bottom pieces of Styrofoam from
the TV, but keep the screen-protection piece
on. Place the TV down on the the box with the
screen facing down.
Secure the bottom of the stand to the TV using
two screws.
M4 x L10
To replace the stand cover, fix its exterior and
then the interior into the stand. Press both
sides firmly to make sure that it is completely
assembled.
Replace the port cover.
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Smart Touch Control
Batteries (AAA x 4)
4
Remote Control
Also included: User manual, 3D active glasses
1B
Stand
1D
1F
1H
1J
One connect and Cables
Power cord
IR extender
RCA adapter x 2
Component adapter
One connect
One connect cable
Pull the stand out of the top Styrofoam
cushioning, and make the stand face your body,
as shown in the illustration. Insert a finger
into the groove in the middle and pull it up to
separate the cover from the stand.
x 4
x 2
Screws
M4 x L20 4 pieces
Stand cover
M4 x L10 2 pieces
Tilt the stand to put its hook into the groove on
the back of the TV, and push it, giving it a slight
turn until it is firmly in place.
Hook
Secure the stand to the TV using four screws as
shown in the diagram.
M4 x L20
Remove the port cover, and connect the power
cord to the One Connect.
Stand the TV up, and remove the Styrofoam
bumper and the 4 protective pads from the
screen.

Advertisement

loading

Summary of Contents for Samsung S9C

  • Page 1: Quick Start

    Welcome to your new Smart TV! QUICK START The following instructions cover assembling, connecting, and setting up your new TV. Make GUIDE sure you have the accessories listed below. Included in this box Remote Control One connect and Cables BN68-05357A-03 Smart Touch Control Power cord IR extender...
  • Page 2: Troubleshooting

    In the United States of America, call us at the pairing button at the back of the Smart Touch Control, pointing at the remote control sensor 1-800-SAMSUNG (1-800-726-7864) or visit us at www. of the TV. samsung.com or www.samsung.com/spsn for support Congratulations on your new Smart TV! and warranty service.