Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Abus PT Series
Summary of Contents for Abus PT Series
- Page 1 PT Series Pressure Transmitters User Manual ABUS TECHNOLOGIES INC.
- Page 2 The contents of this manual are subject to change without prior notice. All rights reserved. ABUS gives no warranty of any kind with regard to this manual, including, but not limited to, fitness for a particular purpose. If any question arises or errors are found, or if any information is missing from this manual, please inform your supplier or inform at info@abustek.com.
-
Page 3: Table Of Contents
2. Presentation 1. Features Technical Parameters 3. Dimensions 4. Ordering Details 5. Connections Output Characteristics 6. Installation Recommendation 7. Operation 1. Zero and Span Adjustment Procedure 2. Example for Usage 8. Maintenance Troubleshooting 9. Safety Precautions 10. Warranty ABUS TECHNOLOGIES INC. -
Page 4: Introduction
A wide range of electrical connection and process connection options are available to meet almost every requirement. The PT Series features an all-welded stainless steel measuring cell for improved media compatibility. There are no internal soft sealing materials that may react with the media or deteriorate over time. -
Page 5: Technical Parameters
85°C (125°C for short durations) * Higher range, on request. Ambient temperature: -20 ~ +80°C Wetted Parts: SS 316L / Al2O3 / NBR Case: Stainless steel Housing: Stainless steel, protection class IP65. 3. DIMENSIONS All dimensions in mm ABUS TECHNOLOGIES INC. -
Page 6: Ordering Details
Indicator (Refer W/O Indicator LPI-PT) With Internal Z & S Zero and Span Adjustment Example: PT20 >10 > D > 1 > W > LPI-PT > 1 STANDARD RANGES FOR PT SERIES CODE GAUGE/ABS. PRESSURE CODE COMPOUND 1.00 bar 600.00 bar 1.60 bar... -
Page 7: Connections
5. CONNECTIONS WIRE SIGNAL OUTPUT EXCITATION 2-wire 4 ~ 20mA 12 ~ 36 Vdc 3-wire 0 ~ 10 Vdc 12 ~ 18 Vdc ABUS TECHNOLOGIES INC. -
Page 8: Output Characteristics
Output Characteristics (FOR PT20-12XXXX Pressure Transmitter) ABUS TECHNOLOGIES INC. -
Page 9: Installation
Span adjustment is done with the S potentiometer by applying the full span pressure and getting an output of exactly 20 mA. 8. After adjustment is done, replace the thread, washer and DIN connector in the reverse order. ABUS TECHNOLOGIES INC. -
Page 10: Example For Usage
Check for leakage at pressure port / point. No variation in output • Check the span set of Indicating Instrument. • Pressure not holding Check for leakage pressure point. • at constant input Check for the connections ensure they are properly pressure. tightened. ABUS TECHNOLOGIES INC. -
Page 11: Safety Precautions
9. All connections should be tightened properly. 10. Power supply should be constant, should not be fluctuating. WARRANTY ABUS provides the original purchaser of this instrument a one (1) year warranty against defects in material and workmanship under the following terms: •...
Need help?
Do you have a question about the PT Series and is the answer not in the manual?
Questions and answers