Related Manuals for Alto M Series
Summary of Contents for Alto M Series
- Page 1 OWNER'S MANUAL M SERIES MONITORS PASSIVE & ACTIVE MODELS www.altoproaudio.com Version 1.4 SEPTEMBER 2007 English...
- Page 2 IMPORTANT SAFETY INSTRUCTION CAUTION WARNING To reduce the risk of electric shock RISK OF ELECTRIC SHOCK and fire, do not expose this equipment DO NOT OPEN to moisture or rain. TO REDUCE THE RISK OF ELECTRIC SHOCK PLEASE DO NOT REMOVE THE COVER OR Dispose of this product should THE BACK PANEL OF THIS EQUIPMENT.
-
Page 3: Table Of Contents
We have also included in the design top, side and bottom groove for easy hanging on the wall of the M Series Monitors through optional bracket. -
Page 4: Philosophy
It is a half / rack, 1U little animal that can produce up to 240 watts of power. And it does not need a fan! Try this amp with one of the M Series Monitor. You will hear a surprising level of high fidelity and dynamic that it is not possible to achieve in self-powered models.Passive Monitors are then becoming popular for Dolby 5.1... -
Page 5: Installation
For this reason we have made our M Series Monitors as flat as possible and did not add any frequency control because there would not be any need for it. - Page 6 3. INSTALLATION 2 CHANNELS+SUBWOOFER This is the best possible positioning for the Monitors and the subwoofer but this set-up maybe not practical in your room. So, play some music with the subwoofer in different positions. Usually, the only possible positioning is under the table.
-
Page 7: Panel Controls
(4) NEAR or FAR Field Selector Via this switch, you can use your M series monitors in the near field or far field configuration. Generally, near field option is designed for near distance, and the speakers are placed relatively close to the listener, normally about 1~1.5m. - Page 8 (2) NEAR or FAR Field Selector Via this switch, you can use your M series monitors in the near field or far field configuration. Generally, near field option is designed for near distance, and the speakers are placed relatively close to the listener, normally about 1~1.5m.
-
Page 9: Hookup Examples
HOOK 5. HOOKUP EXAMPLES -. For Active Monitors In this example the main outputs or control room outputs of your mixer are connected via jack or XLR to the input COMBO connector of your active M Monitor. SENSITIVITY SENSITIVITY NEAR NEAR POWER POWER... - Page 10 HOOK 5. HOOKUP EXAMPLES -. For Passive Monitors INPUT INPUT INPUT CH-B CONNECTION LINE WARNING T(+) (GND) BREAKER TO REDUCE THE RISK OF FIRE R( ) OR ELECTRIC SHOCK, DO NOT S(GND) EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. SEE INSTRUCTION BEFORE USING! LF 30HZ FILTER...
-
Page 11: Wall Mounting
6. WALL MOUNTING To install M Monitor on the wall or ceiling, Alto has provided an optional custom-built bracket: The YS 60 Installation steps: 1. Mount the base (4) on the wall. 2. Adjust the angle of the bracket according to your needs. -
Page 12: Appendix
APPENDIX Exploded Diagram of The Accessory (YS-60) Part Description Item Ni Screw, M6 1.0PH Fixing Bracket - Left Spring Mounting Base Fixing bracket - Right Spring Washer Ni Nut Fixing Lever Zn Screw, M6 1.0PH Connecting Lever Ni Screw, M3 Solid Slide... -
Page 13: Technical Specification
7. TECHNICAL SPECIFICATION Model No. System type 2 Way Power Handing AES 30 W SPL (1W/1m) 87 dB Frequency Response 50 Hz-13 kHz (-10 dB) Max SPL 102 dB Impedance 4 Ohms Crossover Frequency 2.3-3 kHz (1m/W) Dimension (H x W x D) 216.5 x 143.5 x 152.5 mm Net Weight (kg) 2.4 kg... - Page 14 7. TECHNICAL SPECIFICATION Model No. System type 2 Way Power Handing AES 80 W SPL (1W/1m) 95 dB Frequency Response 40 Hz-15 kHz (-10dB) Max SPL 113 dB Impedance 4 Ohms Crossover Frequency 2.3-3 kHz (1m/W) Dimension (H x W x D) 376 x 223.5 x 267 mm Net Weight (kg) 6.6 kg...
-
Page 15: Warranty
8. WARRANTY 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to provide a more effective and efficient after-sales warranty service. - Page 16 NO. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan http://www.altoproaudio.com Tel: 886-4-22313737 email: alto@altoproaudio.com Fax: 886-4-22346757 All rights reserved to ALTO. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. Copyright 2007 Seikaku Group NF01519-1.4...
Need help?
Do you have a question about the M Series and is the answer not in the manual?
Questions and answers