Husqvarna 8527SBEB Owner's Manual page 31

REPAIR PARTS
SNOW THROWER - MODEL NO. 8527SBEB (96193001100), PRODUCT NO. 961 93 00-11
NOTE: All component dimensions given in U.S. inches.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your lawn mower and void your warranty.
KEY PART
NO. NO. DESCRIPTION
1 532 18 78-33 Wheel Assembly, 16", LH
2 532 15 54-43 Pin, Klik 1/4
3 532 18 78-65 Wheel Assembly, 16", RH
4 532 14 63-15 Screw, Hex Head 5/16-18 x 5/8
5 532 17 98-30 Bearing, Axle
6 532 17 46-97 Washer, Thrust (1")
KEY PART
NO. NO. DESCRIPTION
1 532 18 10-38 Decal, Danger
2 532 19 13-76 Decal, Husqvarna
3 532 18 10-34 Decal, Danger, Defl ector
4 532 18 10-41 Decal, Danger
5 532 19 85-89 Decal, Husqvarna, 8527SBEB
6 532 18 10-32 Decal, Instruction
7 532 15 57-98 Decal, Traction Lever
8 532 15 58-00 Decal, Auger Lever
9 532 18 10-36 Decal, Speed Control
10 532 18 37-29 Decal, Remote Defl ector
13 532 15 57-94 Decal, Husqvarna, Crown
- - 532 40 37-57 Owner's Manual
31
WHEELS / DECALS
1 inch = 25.4 mm