AMT Datasouth Fastmark 4000 Series User Manual page 60

Command
d1,hadj
d2,hadj
Notes:
x and y represent horizontal and vertical coordinate values.
1.
hm and vm stand for horizontal and vertical multipliers.
2.
rot is the rotation direction, its value is from 0 to 3.
3.
nr is either N for normal printing or R for reverse printing.
4.
string is bracket by double quote marks, e.g. "text".
5.
**
Commands will cause the printer to save parameters to permanent storage
6.
(E2PROM).
ZS takes effect only if flash memory board is installed.
7.
Description
Set horizontal position
adjustment**
Set horizontal position
adjustment
Parameter
hadj: adjustment in dots.
same as d1, except it is no saved to
E2PROM
User's Guide 59