Vehicle Settings Customisation Menu - Renault Megane Driver's Handbook Manual

vEHIcLE sETTINgs cUsTOmIsATION mENU

On equipped vehicles, this function,
which is integrated in the trip compu-
ter and warning system 1, allows you
to activate/deactivate some of the vehi-
cle's functions.
Accessing the settings
customisation menu
With the vehicle stationary, press
either button 2 or 3 until the mes-
sage "Settings menu: press and hold"
appears on display 1. Press either
button 2 or 3 for longer than 2 seconds
to enter the menu.
1.72
1
Adjusting the settings
Press one of buttons 2 or 3 to select a
function to change:
a) Auto door locking while driving;
b) Unlock driver's door only;
c) Auto rear wipe with reverse gear;
d) automatic daytime running lights
function;
e) Front parking sensor;
f) Automatic main beam lights;
g) Lane deviation volume;
h) Lane deviation sensitivity ;
i) Rear parking sensor;
j) Parking sensor volume;
k) Language.
=
function activated
2
<
function deactivated
Once a line has been selected, keep
pressing button 2 or 3 to change the
function. If you select either "Parking
sensor volume" or "Language", you will
have to make a further selection (sound
volume of the parking sensor or instru-
3
ment panel language). In this case,
make your selection and confirm it by
holding either button 2 or 3, the value
selected is shown by a
of the line.
To exit the menu, select "EXIT" or
"BACK" then confirm by holding either
button 2 or 3. It may be necessary to
carry out this operation several times.
The vehicle settings personalisation
menu cannot be used when driv-
ing. At speed exceeding 12 mph
(20 km/h), the instrumental panel
display switches automatically back
to trip computer and warning system
mode.
~
in front