NEC IP3NA-12TXHBT User Manual page 13

Function
Bluetooth Bluetooth
®
Terminal headset call
Bluetooth LCD display
®
Handset
Line keys
Incoming call/
charging lamp
Key touch tone
Tone type
Volume/density
control
* For the latest recommended product information,
®
please consult with your system provider for a list of
compatible headsets.
* Try to use a recommended headset to ensure that it
connects to the cradle successfully and with the
correctly matched sound volume.
* The Bluetooth
talking with the Bluetooth
switch to the Bluetooth
the Bluetooth
* The headset call (control key) button allows you to
only originate calls from the headset and answer
terminating calls.
Any other headset-specific functions are not supported.
A 20-position-by-2-line LCD screen displays the date,
time, phone number and more.
Icons, such as those designating the status of radio and the
remaining battery voltage, appear on the first line.
* LCD displays may not be produced depending on your
system.
Allows the functions pre-programmed on line keys 1 to 8
in the Bluetooth
* For the functions that are available with the Bluetooth
handset, refer to the manual that comes with your
system.
Lights or blinks when calls terminate or the Bluetooth
handset is charged.
Provides an audible verification of each click on a dial
key.
When calls terminate, a ring tone sounds from the speaker
in the cordless terminal. The ring tone sounds in different
ways depending on the status of the Bluetooth
• Charging (handset returned to the cradle)
Sounds from the speaker in the cradle only
• Standby (handset removed from the cradle)
Sounds from both the cradle and handset speakers
Allows you to use the cursor keys, to adjust the receiver
and ring tone volumes, and the LCD contrast.
About Cordless Terminals
Description
handset cannot be used while you are
®
® headset on. You cannot
® headset while you are using
® handset, either.
terminal to be used.
®
®
®
® handset:
1 - 3