Llc-Based Multiplexing Or Ppp Encapsulation; Advance Setup Options; Figure 133 Menu 11.6 For Vc-Based Multiplexing; Figure 134 Menu 11.6 For Llc-Based Multiplexing Or Ppp Encapsulation - ZyXEL Communications Prestige 2602R Series User Manual

Figure 133 Menu 11.6 for VC-based Multiplexing

VC Options for IP:
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0

25.5.2 LLC-based Multiplexing or PPP Encapsulation

For LLC-based multiplexing or PPP encapsulation, one VC carries multiple protocols with
protocol identifying information being contained in each packet header.

Figure 134 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The
valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local
management of ATM traffic).

25.5.3 Advance Setup Options

In menu 11.1, select PPPoE in the Encapsulation field.
Chapter 25 Remote Node Configuration
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (VC-Multiplexing)
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
ENTER here to CONFIRM or ESC to CANCEL:
Prestige 2602R Series User's Guide
VC Options for Bridge:
VPI #= 1
VCI #= 36
ATM QoS Type= N/A
Peak Cell Rate (PCR)= N/A
Sustain Cell Rate (SCR)= N/A
Maximum Burst Size (MBR)= N/A
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
257