Cable Separation And Routing - Sirius Satellite Radio Stratus 5 User Manual

Cable Separation and Routing

FCC Information
The satellite antenna cable, FM Extender Antenna (FEA) cable and cigarette lighter
adapter (CLA) power cable must be appropriately separated and routed for your radio to
be compliant with federal regulations.
Step 1
LEFT RIGHT
The connections on your vehicle dock are
clearly marked. Install your vehicle dock
and connect the antenna cable into the
connection labeled "ANT", the CLA power
cable into the power connection marked
Power FEA Antenna
"PWR" (or 5VDC) and the FEA cable
into the connection marked "FM OUT".
(See Figure 17 .)
PWR
AUDIO
Figure 17
Step 2
It is important that you keep the three cables as separate from each other as
possible and that you keep the two antenna cables away from the vehicle dock and
from the CLA power cable. The cables must not be bundled together as they exit the
dock (see Figure 18 , on page 39).
As a guide, you can follow the diagram in Figure 18 , adapting the example to suit your
own vehicle's confi guration. For example, if you cigarette lighter socket is to the left
of the vehicle dock, route the two antenna cables towards the passenger side of the
vehicle. If your cigarette lighter socket is on the right-hand side of the vehicle dock,
route the two antenna cables towards the driver's door. The CLA cable and antenna
cables MUST be routed in opposite directions. Safely conceal all antenna cables within
door, carpet or cash panels to prevent snags and interference.
[ ]
38
Installation