Motion Settings - Samsung Galaxy SII User Manual

Motion Settings

This feature allows you to assign specific functions to certain
phone actions that are detected by both the accelerometer
and gyroscope.
To activate motion:
1. From the main Settings page, tap Motion.
2. In a single motion touch and slide the Motion slider to
the right to turn it on.
Note: If Motion activation is not enabled, all motion services
are greyed-out and disabled.
To activate different motion functions:
Tap the Motion activation field and activate the desired
on-screen motion option.
• Direct call: Once enabled, the device will dial the currently
displayed on-screen Contact entry as soon as you place the
device to your ear.
• Double tap to top: Once enabled, double tap the top of the
device to be taken to the top of the current on-screen list.
283
• Tilt to zoom: Once enabled, you must be on a screen where
content can be zoomed. In a single motion, touch and hold two
points on the display then tilt the device back and forth to zoom
in or out.
• Pan to move icon: Once enabled, touch and hold a desired
application shortcut icon or widget on the screen. Once it
detaches, move the device left or right to migrate it to a new
location.
• Pan to browse images: Once enabled, touch and hold a
desired on-screen image to pan around it. Move the device left
or right to pan vertically or up and down to pan horizontally
around the large on-screen image.
• Shake to update: Once enabled, shake your device to rescan
for Bluetooth devices, rescan for Wi-Fi devices, Refresh a Web
page, etc.
• Turn over to mute/pause: Once enabled, mute incoming calls
and any playing sounds by turning the device over display down
on a surface. This is the opposite of the pickup to be notified
gesture.
For more information, refer to "Using Gestures" on page 41.