Horizon Fitness EX-59 Owner's Manual page 13

ASSEMBLY STEP 8
CONSOLE
CONSOLE MAST
CONSOLE CABLES
UPPER HANDLEBAR
BOLTS (X)
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
NOTE: Be careful not
to pinch any wires while
attaching the console.
HARDWARE BAG 8 CONTENTS :
Open hardware bag 8.
A
B Attach the CoNSoLE CABLES to the CoNSoLE.
C Carefully tuck the CoNSoLE CABLES into the
CoNSoLE MAST before attaching the CoNSoLE.
Attach CoNSoLE to CoNSoLE MAST using 4
BoLTS (X).
D Slide UPPER HANDLEBARS onto LoWER
HANDLEBARS making sure handlebars are
joined together completely. Secure UPPER
HANDLEBARS to LoWER HANDLEBARS using
PRE-ATTACHED SET SCREWS.
Make sure upper handlebars are as far down as possible.
Handlebars can be damaged If not secured correctly.
E Repeat step D on the opposite side of the elliptical.
YOU ARE FINISHED!
BOLT (X)
10 mm
Qty: 4
13