D-Link AirPremier DWL-00AP Manual page 28

Using the Configuration Menu (continued)
DHCP Server
Control-
Enable or
Disable the DHCP
function here.
Static Pool
Settings
Assigned lP-
Enter the static IP
address of the
device here.
Assigned MAC
Address-
Enter the MAC
address of the
device here.
SubMask-
Enter the subnet
mask here.
Gateway-
Enter the IP address of the gateway on the network.
Wins-
Windows Internet Naming Service is a system that determines the IP address of the
a network computer that has a dynamically assigned IP address.
DNS-
Enter the IP address of the DNS server. The DNS server translates domain names such
as www.dlink.com into IP addresses.
Domain Name-
Enter the Domain Name of the DWL-00AP.
Status-
Turn the Static Pool Settings ON or OFF here.
Assigned Static Pool
After you have input the Static Pool Settings for each device, click Apply and the
profile will appear in this list at the bottom of the window.
*Please note that IPs assigned in the Static Pool Settings must not be in the same
range as those in the Dynamic Pool Settings.
Advanced > DHCP Server > Static Pool Settings*
8