D-Link AirPremier DWL-00AP Manual page 14

Using the Configuration Menu (continued)
Home > Wireless > AP Mode
Wireless
Band-
IEEE 80.g.
Mode-
Access Point is selected from the pull down menu..
Service Set Identifier(SSID)is the name designated for a specific
SSID-
wireless local area network(WLAN).The SSID's factory default setting
is dlink.The SSID can be easily changed to connect to an existing
network or to establish a new wireless network.
SSID
Enable or Disable SSID Broadcast. Enabling this feature broadcasts
the SSID across the network.
Broadcast-
Channel-
All devices on the network must share the .
Auto Channel
Select Enable or Disable.(Enable this feature to auto-select the channel
Scan- for best wireless performance.) Enable is selected by default.
Radio-
Select On or Off.
Super G Super G is a group of performance enhancement features that
increase end user application throughput in an 80.g network.
Mode-
Super G is backward compatible to standard 80.g devices.
For top performance, all wireless devices on the network should be
Super G capable. Select either Disabled, Super G without Turbo, or
Super G with Dynamic Turbo.
4