D-Link AirPremier DWL-00AP Manual page 21

Using the Configuration Menu (continued)
Home > Wireless>WDS Mode(continued)
Remote AP Mac
Address-
Authentication
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same
WEP settings.
Select Open System/Shared Key to allow either form of data encryption.
Select WPA-PSK, WPA2-PSK, WPA-Auto-PSK to secure your network using a
password and dynamic key changes. (No RADIUS server required).
Home > Wireless> WDS Mode> WEP Encryption
Encryption:
Key Type*:
Key Size:
Valid Key:
First through
Fourth keys:
*Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Home>Wireless>WDS Mode>WPA-PSK, WPA2-PSK, WPA-Auto-PSK
Cipher
Type:
Group Key
Update Interval:
PassPhrase:
Enter the MAC address of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
: Open System
Shared Key
Open System/Shared Key
WPA-PSK
WPA2-PSK
WPA-Auto-PSK
Select Disabled or Enabled. (Disabled is selected here).
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
AES is used here.
Select the interval during which the group key wll be valid. The
default value of 800 is recommended.
Enter a PassPhrase in the corresponding field.