Provisioning Details; Viewing Registrar Entries - Talkswitch owner friendly User Manual

b) Select the method used to keep ports open. Choices are:
• Simple ping — A standard ping message that works with all SIP servers.
• Nortel ping — A ping message that works with Nortel SIP servers (e.g. Nortel
MCS 5200).
c) If necessary, change the ping frequency. The default setting is 45 seconds.
6. You can specify which codecs to use by clicking the Codec options button. See Setting codec
options on page 55.

Provisioning details

Enter the IP addresses or FQDNs, as provided by the service provider, into the following boxes. If
the service provider does not specify a value, leave the box blank.
• Proxy server name
• Registrar server name
• Outbound proxy
• Realm/domain
The View All Registration button will allow you to confirm connection to your service provider
once you have completed the configuration of your VoIP numbers. See Viewing registration
status on page 54.
If you want to customize other aspects of your VoIP lines, you may do so in the System VoIP
Options area. See System VoIP options on page 49.

Viewing registrar entries

If you are configuring the TalkSwitch profile for the SIP server, the window enables the View
Registrar Entries button. Clicking the button shows the Registrar Entries window with a list
of the VoIP numbers, their IP addresses and port numbers, and the number of seconds until their
registrations with the SIP server will expire.
1. Click View Registrar Entries. The Registrar Entries window appears.
• Client lists the VoIP numbers set up within the TalkSwitch units.
• Contact lists the address information used by the SIP server to contact the client. It is
comprised of the VoIP number, public IP address and port number.
• Expires is the amount of time, in seconds, until the client has to re-register with the
SIP server.
T A L K S W I T C H C O N F I G U R A T I O N 53