Inserting Batteries Into The Remote Control; Initial Setup - Sony Bravia KDL-46S504 Operating Instructions Manual

Inserting Batteries into the Remote Control
Insert two size AA batteries ( upplied) by
matching
0
and
0
on the batterie to the
diagram inside the battery compartment of
the remote control.
Initial Setup
Push to
open
The Initial Setup screen appear when you turn on the TV for the first time.
During this initial setup, you can perform the following:
1
Select the language for the on-screen di play text.
2
Select HOME or Retail mode.
3
Connect cable or antenna, then select OK to run Auto
Program.
p
• If you have cable and antenna available, please connect
cable first.
• IMPORTANT: Auto Program process is only effective when cable or antenna is connected.
If
you cancel Auto Program before completion some channels may not be available.
4
Auto Program will scan for available channels from the signal source directly connected to
the TV's CABLE/ANTENNA input and may take ometime to complete the proce s. Follow
the help text provided on the screen to run Auto Program.
~
Suggestions
• When prompted to select HOME or
Retail,
be sure to select
HOME for ENERGY STAR compliant mode.
• If you use both cable without a box and antenna connections, use an
A-B RF witch (not supplied). For more details, see the online
Reference Book.
• Select your preferred aspect ratio for the creen display. Press
WIDE to select the wide mode or press MENU and set the Auto
Wide
to
On under the Screen menu.
• To change the clock, press MENU and go to Setup menu then
elect ClocklTimers and adjust Current
Time.
12