Related Manuals for EVOC EC3-1816CLD2NA
Summary of Contents for EVOC EC3-1816CLD2NA
- Page 1 特种计算机 Industrial Computer 产品说明书 User Manual EC3-1816CLD2NA Cedar Trail + NM10 3.5 寸主板 Cedar Trail+NM10 3.5-inch Motherboard 版本：B00...
-
Page 2: Legal Information
Please pay attention to the following instructions: Warning EVOC product can only be used according to the descriptions within the manual, including the contents and the relevant technical documents. If the products or components from other companies are required, please get the recommendation and grant from EVOC first. -
Page 3: Copyright Notice
Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies. -
Page 4: About This Manual
About this manual Scope of the Manual The manual is appropriate for EVOC EC3-1816CLD2NA. Convention The term “the PC” or “the Product” within the manual usually stands for EVOC EC3-1816CLD2NA. Instructions Safety instructions To avoid property losses or individual injury, please pay attention to the safety instructions within the manual. -
Page 5: Table Of Contents
Contents 1. Product Introduction ....................1 1.1 Overview......................1 1.2 Mechanical Dimensions, Weight and Environment..........1 1.3 Typical Consumption ..................2 1.4 Microprocessor....................2 1.5 Chipset .......................2 1.6 System Memory ....................2 1.7 Display .......................2 1.8 Network......................3 1.9 Audio........................3 1.10 Power Feature ....................3 1.11 Watchdog......................3 1.12 Operating System .....................3 1.13 I/O Ports ......................3 2. - Page 6 2.8 USB Port ......................11 2.9 LAN Port......................12 2.10 Audio Port ......................13 2.11 Mouse/Keyboard Port..................13 2.12 SATA Interface ....................13 2.13 SATA HDD Hot Plugging ................14 2.14 GPIO Port.......................16 2.15 Fan Connector ....................16 2.16 Power Connector....................17 2.17 Status Indicating and Control Connectors ............17 2.18 Mini-PCIe Port ....................18 2.19 CF Card (optional) ..................19 3.
-
Page 7: Product Introduction
This motherboard contains Intel® Atom™D2550/N2600 + NM10 chipset (EC3-1816CLD2NA-D2550 contains Intel® Atom™ D2550 + NM10 chipset, EC3-1816CLD2NA-N2600 contains Intel® Atom™ N2600 + NM10 chipset), D2550 is 1M Cache 1.86GHz，N2600 is 1M Cache 1.6GHz；supports onboard 2GB DDR3 memory (EC3-1816CLD2NA-D2550 motherboard supports onboard 1066MHz 2GB memory;... -
Page 8: Typical Consumption
Micro-FCBGA11 package. 1.5 Chipset Intel® ATOM™ D2550/N2600 + NM10. 1.6 System Memory Onboard 2GB DDR3 memory, EC3-1816CLD2NA-D2550 supports 1066MHz memory; EC3-1816CLD2NA-N2600 supports 800MHz memory. 1.7 Display Supports VGA and LVDS display; VGA supports hot swap; all are sync output;... -
Page 9: Network
4 x COM port; COM1 supports RS-232/RS-485 mode selection; 1 x CF card slot (optional); 2 x SATA2.0 interface (optional), supporting hot swap; 6 x USB2.0 port; 1 x PS/2 keyboard/mouse port; 1 x 8-channel digital I/O port. EC3-1816CLD2NA - 3 -... -
Page 10: Installation Instructions
Warning! Please adopt appropriate screws and proper installation methods (including board allocation, CPU and heat sink installation, etc); otherwise, the board may be damaged. It is recommended to use M3x6 GB9074.4-88 screws at H1 ~ H4. - 4 - EC3-1816CLD2NA... -
Page 11: Port Location
Installation Instructions 2.2 Port Location EC3-1816CLD2NA - 5 -... -
Page 12: Structure Diagram
Tip: How to identify the first pin of the jumpers and connectors Observe the letter beside the socket: the first pin is usually marked with “1” or bold lines or triangular symbols; Observe the solder pad on the back: usually the square pad is the first pin. - 6 - EC3-1816CLD2NA... -
Page 13: Jumper Setting
2-3 Short ATX power-on mode (Default) JP2～JP3: COM1 RS-232/ RS-485 Mode selection (Pitch: 2.0mm) COM1 supports two operating modes: RS-232/RS-485. The mode selection can be realized by setting JP2/JP3. Mode Selection RS-232 Setting RS-485 （Default） JP2, JP3 EC3-1816CLD2NA - 7 -... -
Page 14: Com Port
2.5 COM Port The board provides one DB9 COM port. The COM1 supports RS-232/RS-485. Signal RS-232 RS-485 DCD# Data- Data+ DTR# COM1 DSR# RTS# CTS# Note: Under RS-485 mode, the data transmission direction is controlled automatically. - 8 - EC3-1816CLD2NA... -
Page 15: Lcd Backlight Control Connector
LCD_BKLTCTL--- backlight control (The signal is output directly from CPU, and is PWM signal; voltage amplitude 0V—3.3V, duty cycle is within 0-100%); LCD_BKLTEN --- backlight enabling signal, active high. (The signal is output directly from CPU, CMOS output, voltage amplitude 0V-3.3V.) EC3-1816CLD2NA - 9 -... -
Page 16: Display Port
1.0mm). If single-channel 18-bit/24-bit LVDS screen is used, LVDS data cable must be connected to LVDS1. The pin definitions of dual-channel 24-bit LVDS are as follows: Signal Signal LVDSO_D0+ LVDSO_D0- LVDSO_D1+ LVDSO_D1- LVDSO_D2+ LVDSO_D2- LVDSO_CLK LVDSO_CL LVDS1 LVDSO_D3+ LVDSO_D3- - 10 - EC3-1816CLD2NA... -
Page 17: Usb Port
This board provides one dual-USB port connector (J1) and two 2x5Pin USB ports (J2, J3, pitch: 2.0mm), supporting six USB devices. Their pin definitions are as follows: Signal USB_Data- USB_Data+ J1（USB） Signal Signal USB1_Data- USB2_Data- USB1_Data+ USB2_Data+ J2、J3 EC3-1816CLD2NA - 11 -... -
Page 18: Lan Port
LED on the left is “flashing”; when it is connected to network with no data transmission, the green LED is “off”; when there are broadcasting packages, it is normal if the ACTLED is “flashing”. Signal Signal MX0+ MX0- MX1+ MX1- MX2+ MX2- MX3+ MX3- LINK1000- LINK100- LAN2 ACT_LED+ ACT_LED- - 12 - EC3-1816CLD2NA... -
Page 19: Audio Port
This motherboard provides one double-layer SATA interface. SATA2 is optional, and the selection method can be set in BIOS SETUP. Please refer to BIOS Setup part for detailed information. Signal Signal TX1+ TX2+ TX1- TX2- RX1- RX2- RX1+ RX2+ SATA1/SATA2 EC3-1816CLD2NA - 13 -... -
Page 20: Sata Hdd Hot Plugging
Step 1: Please connect the 1 x 4 pin SATA power connector (white) with the 1x4-pin power cable of power adapter. Step 2: Please connect the SATA data cable to the SATA connector on the motherboard. - 14 - EC3-1816CLD2NA... - Page 21 SATA HDD Hot Unplugging Steps Step 1: Uninstall the hard disk from the device manager. Step 2: Unplug the data cable from the SATA hard disk. Step 3: Unplug the SATA 15-pin power connector (black) from the SATA hard disk. EC3-1816CLD2NA - 15 -...
-
Page 22: Gpio Port
CPU card. It is recommended to use a fan with speed detection. Adjust the fan’s airflow to the direction of heat venting. Signal +12V FAN_IO CPUFAN1 FAN_PWM FAN_IO: fan speed pulse output; FAN_PWM: fan speed PWM control. - 16 - EC3-1816CLD2NA... -
Page 23: Power Connector
Wafer 1x4P power connector (white, pitch: 2.54mm) Signal +12V PWR2 2.17 Status Indicating and Control Connectors Power switch and HDD indicator ports (Pitch: 2.54mm) Signal Signal PWRBTN# RESET# HDD_LED- HDD_LED+ Power indicator port (Pitch: 2.54mm) Signal PWR_LED+ EC3-1816CLD2NA - 17 -... -
Page 24: Mini-Pcie Port
This board provides one Mini-PCIe slot, which supports WiFi wireless network card. MPCIE1 (on the back side of the board) Signal Signal WAKE# +3.3VSB +1.5V CLKREQ# REFCLK- REFCLK+ Reserved Reserved W_DISABLE# PERST# PERn0 +3.3V PERp0 +1.5V SMB_CLK PETn0 SMB_DATA PETp0 - 18 - EC3-1816CLD2NA... -
Page 25: Cf Card (Optional)
128M, 256M. CF card could only be inserted in one direction and it is marked as CF1 on the back of the board. Signal Signal CD1# CS0# CS1# VS1# ATASEL# IOR# IOW# EC3-1816CLD2NA - 19 -... - Page 26 Installation Instructions CSEL# VS2# RESET# IORDY DREQ DACK# DASP# ATA66_DET WP/IOCS16# CD2# - 20 - EC3-1816CLD2NA...
-
Page 27: Bios Setup
Please use the internal default value of UEFI to restore the system. Our company is constantly researching and updating UEFI, its setup interface may be a bit different. The figure below is for reference only; it may be different from your UEFI setting in use. EC3-1816CLD2NA - 21 -... -
Page 28: Basic Function Setting For Uefi
(C) 2009 American Megatrends, Inc. will appear: Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc. Copyright(C) Main Advanced Chipset Boot Security Save & Exit Motherboard Information Set the Date. Use‘Tab’ to Project Name EC3-1816CLD2NA switch between Date BIOS Name P9173000 elements. BIOS Version... - Page 29 LVDS BackLight Value F1：General Help F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.00.1201. Copyright (C) 2009,American Megatrends, Inc. SATA Port Mode To select whether SATA port is SATA device or CF card. DP-to-LVDS Panel Type EC3-1816CLD2NA - 23 -...
- Page 30 Display the relevant information of CPU. Note: the Type, Speed, Core and HT of the CPU are related to the CPU installed in the platform; different series of CPUs will display different information. Hyper-Threading Control switch of the Hyper Threading Technology. - 24 - EC3-1816CLD2NA...
- Page 31 Advanced →←：Select Screen USB Configuration ↑↓：Select Item USB Devices: Enter：Select 1 Keyboard，1 Mouse, 2 Hubs +/-：Change Opt F1：General Help Legacy USB Support [Enabled] F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.00.1201. Copyright (C) 2009,American Megatrends, Inc. EC3-1816CLD2NA - 25 -...
- Page 32 →←：Select Screen Serial Port 0～3 Configuration ↑↓：Select Item Serial Port [Enabled] Enter：Select Device Settings IO=3F8h; IRQ=4; +/-：Change Opt F1：General Help Change Settings [Auto] F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.00.1201. Copyright (C) 2009,American Megatrends, Inc. - 26 - EC3-1816CLD2NA...
- Page 33 System Temperature Current system temperature, monitored by the thermal resistor on motherboard. CPU Temperature Current CPU temperature, monitored by the temperature sensor on motherboard. CpuFan Speed Current CPU fan speed. EC3-1816CLD2NA - 27 -...
- Page 34 PPM Configuration →←：Select Screen ↑↓：Select Item EIST [Enabled] Enter：Select +/-：Change Opt F1：General Help F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.00.1201. Copyright (C) 2008,American Megatrends, Inc. EIST It is the CPU frequency adjustable function of Intel. - 28 - EC3-1816CLD2NA...
- Page 35 Main Advanced Chipset Boot Security Save & Exit Host Bridge →←：Select Screen South Bridge ↑↓：Select Item Enter：Select +/-：Change Opt F1：General Help F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.00.1201. Copyright (C) 2009,American Megatrends, Inc. EC3-1816CLD2NA - 29 -...
- Page 36 F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.00.1201. Copyright (C) 2008,American Megatrends, Inc. IGFX – Boot Type Low Set the primary display device booted by IGD. Fixed Graphics Memory Size Set the graphics memory size. - 30 - EC3-1816CLD2NA...
- Page 37 AC power; if the computer is powered off (S5 status) when the power outage or shutdown occurred, then the computer will not automatically power on after restoring AC power (remaining S5 status). EC3-1816CLD2NA - 31 -...
- Page 38 This option is used to select the USB controlling mode. * UHCI #X (ports X and X) This option is used to enable or disable in the controller mode. * USB 2.0(EHCI) Support This option is used to enable USB2.0. - 32 - EC3-1816CLD2NA...
- Page 39 F3：Optimized Defaults F4：Save Hard Drive BBS Priorities ESC：Exit Version 2.00.1201. Copyright (C) 2009,American Megatrends, Inc. Quiet Boot Boot mode selection switch, which is used to enable or disable Quiet Boot function. Boot Option Priorities EC3-1816CLD2NA - 33 -...
- Page 40 Version 2.00.1201. Copyright (C) 2009,American Megatrends, Inc. Setup Administrator Password This option is used to set administrator password. Note: If ONLY the Administrator's password is set, then this is only asked for when entering Setup; - 34 - EC3-1816CLD2NA...
-
Page 41: System Resource Managed By Bios Under X86 Platform
We define three kinds of system resources here: I/O port address, IRQ interrupt number and DMA number. Level Function DMA0 Unassigned DMA1 Unassigned DMA2 Unassigned DMA3 Unassigned DMA4 Used for DMAC cascade DMA5 Unassigned DMA6 Unassigned DMA7 Unassigned EC3-1816CLD2NA - 35 -... - Page 42 2F8h – 2FFh COM2 3B0h – 3BBh Intel(R) Graphic Media Accelerator 3C0h – 3DFh Intel(R) Graphic Media Accelerator 3E8h – 3EFh COM3 3F8h – 3FFh COM1 4D0h – 4D1h Programmable Interrupt Controller D00h – FFFFh PCI Bus - 36 - EC3-1816CLD2NA...
- Page 43 Reserved IRQ2 IRQ3 COM 2 COM 1 IRQ4 IRQ5 Reserved Reserved IRQ6 IRQ7 COM3/4 IRQ8 System CMOS/Real Time Clock Reserved IRQ9 IRQ10 Reserved Reserved IRQ11 IRQ12 PS/2 Mouse IRQ13 Numeric data processor IRQ14 Reserved Reserved IRQ15 EC3-1816CLD2NA - 37 -...
-
Page 44: Installing The Drivers
Installing the Drivers 4. Installing the Drivers Regarding the driver program of this product, please refer to the enclosed CD. - 38 - EC3-1816CLD2NA... -
Page 45: Appendix
Appendix 5. Appendix 5.1 BPI Function EVOC BPI (BIOS Programming Interface) is a cross-platform, easy-to-maintain software interface specification, which supports access to hardware under the Protected Mode of the operating system. The function of the product is to provide a unified standard interface for the application software or driver;... - Page 46 BPI only requires one set of the maintenance software. Low Cost Developing the applications by BPI will not result in additional hardware and software cost, but it will reduce the development difficulty, development cycle and time-to-market for the system integrator. - 40 - EC3-1816CLD2NA...
-
Page 47: Troubleshooting And Solutions
1. Please check whether there are bad tracks on the hard disk by third party software; Slow to enter 2. Please make sure the remaining space on the system operating system partition is enough; 3. Please check whether the CPU fan is operating EC3-1816CLD2NA - 41 -... - Page 48 BIOS Setup for ISA to use I/O or memory resource on most of the motherboards; and check whether the detected IRQ used by ISA card has been reserved in BIOS Setup; 2. The ISA card usually cannot be identified directly under the - 42 - EC3-1816CLD2NA...
- Page 49 Appendix system; please choose “Add Hardware” in the “Control Panel” in Windows system to set. EC3-1816CLD2NA - 43 -...
Need help?
Do you have a question about the EC3-1816CLD2NA and is the answer not in the manual?
Questions and answers