Table of Contents
Advertisement
Quick Links
Legal Information
Warnings
Please pay attention to the tips within the manual so as to avoid personal injury or
property losses. The tips for personal injury are indicated in warning triangles while
the tips only related to property losses have no warning triangles. The warning tips are
listed as follows with the hazardous scale from severe to slight.
Danger
If handled carelessly, death or severe human injury will occur.
Warning
If handled carelessly, death or severe human injury might occur.
Caution
Warning triangle indicates that slight human injury might occur if handled carelessly.
Note
Unexpected result or status might occur, if not handled according to the tips.
Professional Personnel
The product/system covered by the manual can only be handled by qualified and
professional personnel. During operation, please follow the respective instructive
manuals, especially the safety warnings. The professional personnel have been trained
and possess relevant experiences; therefore, he/she could be aware of the risks of the
product/system and avoid possible damages.
EVOC Product
Please pay attention to the following instructions:
Warning
EVOC product can only be used according to the descriptions within the manual,
including the contents and the relevant technical documents. If the products or
components from other companies are required, please get the recommendation and
grant from EVOC first. Proper transportation, storage, assembly, installation,
debugging, operation and maintenance are prerequisite to ensure product safety and
normal operation; therefore, please ensure permitted environment conditions and
pay attention to the tips within the manual.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EVOC NPC-8220
Summary of Contents for EVOC NPC-8220
-
Page 1: Legal Information
Please pay attention to the following instructions: Warning EVOC product can only be used according to the descriptions within the manual, including the contents and the relevant technical documents. If the products or components from other companies are required, please get the recommendation and grant from EVOC first. -
Page 2: Copyright Notice
Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies. -
Page 3: About This Manual
About this manual Scope of the Manual The manual is appropriate for EVOC NPC-8220. Convention The term “the PC” or “the Product” within the manual usually stands for EVOC NPC-8220. Instructions Safety instructions To avoid property losses or individual injury, please pay attention to the safety instructions within the manual. -
Page 4: Safety Instructions
Safety Instructions General Safety Instructions Caution Before you have read related safety instructions, please do not expand your device. This device is compliant with related safety requirements. If you have any doubt about the effectiveness of installation in the planned environment, please contact your service representative. - Page 5 ESD Instructions The following label can be used to identify the modules that contain electrostatic sensitive devices: When operating the modules that contain electrostatic sensitive devices, please follow the instructions below: When operating the modules that contain electrostatic sensitive devices, make sure to release static electricity on your body (for example, by touching a grounded object).
-
Page 6: Table Of Contents
Contents 1. Product Introduction ....................1 1.1 Overview .......................1 1.2 Specifications ....................2 1.3 Operating Instructions ...................6 1.3.1 External Functions................6 1.3.2 Internal Layout ..................8 1.3.3 Operation Control................9 1.4 Status LED....................10 2. Application Scheme ....................11 2.1 Transportation....................11 2.2 Storage......................11 2.3 Opening the Box and Initial Examination............12 2.3.1 Opening the Box................12 2.3.2 Markings for PC Identification............12 2.4 External Environment Conditions ...............12... - Page 7 5.2.3 USB Port ..................18 6. Software Introduction .....................19 6.1 BPI Overview ....................20 6.2 FMI Overview .....................22 6.3 eManager Software..................23 6.3.1 Operating Environment ..............23 6.3.2 Function...................24 6.3.3 Firmware Management..............27 7. Installing Expansion ....................30 7.1 Opening the PC....................30 7.2 Installation and Removal of CFast Card............31 8.
-
Page 8: Product Introduction
The PC supports single power supply or redundant power supply, and can meet various network security application needs on the market. NPC-8220 can be widely used in firewall, anti-virus wall, load balance, Internet access management and audit, application delivery, flow traffic management, VPN, DNS, IDS/IPS, UTM and etc. -
Page 9: Specifications
IPMI remote management function. When used together with NET-2815VD2N-01 motherboard, it supports four 3.5/2.5-inch drawable bays; when used together with Storage NET-2815VD2N-02 motherboard, it supports two 2.5-inch HDD bays. Supports expansion to one CFast card. · 2 · NPC-8220... - Page 10 PCIE3.0/2.0/1.1 standard. Expandable to one PCIE X8 card (only provides X4 Expansion bus signal); supports 68.9mm height; 140mm length; compatible with 2.0/1.1 standard. Expandable to eight or four EVOC standard ENS modular cards, varying with different configurations. ...
- Page 11 Input voltage/frequency: 220VAC/50Hz Power consumption of the PC: 186.6W(standby status) Power feature Power consumption of the PC: 220.7W (operating BurnIntest 100%) Notes: 1. ENS modules can be plugged only after AC power is disconnected. · 4 · NPC-8220...
- Page 12 9-16 excessive ones can be inserted into any redundant slots, and at same time memory quantity balance of the two CPUs must be considered. Notes: LRDIMM and RDIMM memory cannot be used on a same motherboard. NPC-8220 · 5 ·...
-
Page 13: Operating Instructions
LAN port ENS empty bracket NPC-8220-01 HDD and LAN port sequence diagram Note： NPC-8220-01 LAN port sequence: ENS1> ENS2> ETHA> ETHB> ENS5> ENS6. Among them, ENS1 and ENS2 are controlled byCPU1, ENS5 and ENS6 are controlled by CPU2. · 6 ·... - Page 14 NPC-8220-02 LAN port sequence diagram Note： NPC-8220-02 LAN port sequence: ENS1> ENS2> ENS3> ENS4> ENS5> ENS6> ETHA> ETHB> ENS5> ENS6> ENS7> ENS8. Among them, ENS1、 ENS2、 ENS3 and ENS4 are controlled by CPU, ENS5、 ENS6、 ENS7 and ENS8 are controlled by CPU2.
-
Page 15: Internal Layout
Rear View Location Description Cooling fan Ground screw Power switch USB(optional) Redundant power module (optional) Bypass switch 1.3.2 Internal Layout Internal layout of NPC-8220-01 Location Description CFast card module Redundant power module (optional) Cooling fan motherboard · 8 · NPC-8220... -
Page 16: Operation Control
Product Introduction Internal layout of NPC-8220-02 Location Description HDD module Redundant power module (optional) Cooling fan motherboard 1.3.3 Operation Control Warning Pressing On/Off button won’t cut off the power of the PC! Caution When the PC executes hardware reset, data may be lost. -
Page 17: Status Led
CPU load CPUS indication Load alarm Abnormal system System Off/on heartbeat heartbeat indication Green flashing Normal User-defined Network operating status User-defined Note: LEDs for FANS, CPUS, SYS and LAN need to be used together with system software. · 10 · NPC-8220... -
Page 18: Application Scheme
Under this circumstance, please make sure no water drop (condensation) is formed on the surface or interior of the device. If condensation is formed on the device, please wait for over twelve hours before connecting the device. NPC-8220 · 11 ·... -
Page 19: Opening The Box And Initial Examination
Serial number: located on the chassis body (as shown below) 2.4 External Environment Conditions The following conditions should be considered when planning the project: The weather and mechanical environment conditions specified in the operation manual should be observed. · 12 · NPC-8220... - Page 20 Please do not block the ventilation hole of the PC. The installation position requirement for the PC should be always observed. The connected or installed I/O should not generate reverse voltage of more than 0.5V inside the PC. NPC-8220 · 13 ·...
-
Page 21: Product Installation
PC onto the cabinet. Note: The PC must be placed on the supporting board or guiding rail. Do not fasten the PC only by the screws on the front panel. · 14 · NPC-8220... -
Page 22: Pc Connection
PC or the central grounding busbar on the device. The minimum cross section area of the cable shall be no less than 2.5mm . The maximum ground resistance should be no more than 0.1Ω. NPC-8220 · 15 ·... -
Page 23: Connecting The Device To Power
Danger Disconnect the power source and data cable during a lightning storm. Attention The PC is completely isolated from the power supply only by disconnecting the power connector. · 16 · NPC-8220... -
Page 24: Debugging
The PC provides one RJ45 COM port, supporting serial port redirection. Its pin definition is as follows: Signal Name RTS# DTR# Console DSR# CTS# 5.2.2 LAN port ACTLED and LILED are the green and dual-color LEDs beside the Ethernet port, indicating LAN activity status and network speed. NPC-8220 · 17 ·... -
Page 25: Usb Port
Green 1000Mbps Data being Flash Orange 100Mbps transmitted No data being 10Mbps transmitted 5.2.3 USB Port Two USB2.0 ports on the front panel. Their pin definitions are as follows: Signal Name +5V_USB USB_Data- USB_Data+ USB1, USB2 · 18 · NPC-8220... -
Page 26: Software Introduction
Software Description Supported Range Name BIOS programming interface All supporting BPI specification, which provides motherboards and PCs of EVOC unified interface for software to company access hardware. A platform management All the motherboards/complete application software developed PCs that support BPI can run... -
Page 27: Bpi Overview
Software Introduction 6.1 BPI Overview EVOC BPI (BIOS Programming Interface) is a cross-platform, easy-to-maintain software interface specification, which supports access to hardware under the Protected Mode of 32-bit or 64-bit operating system and supports multi-process and multi-threading hardware access. BPI is a bridge between hardware and application software, and its purpose is to provide a unified standard interface for the application layer (in the form of library function, similar to library function of standard C). - Page 28 Security and High Reliability The BPI function library accessing the hardware is programmed by the motherboard developer and is strictly tested; therefore, it can avoid system malfunction caused by improper operation of the system hardware. NPC-8220 · 21 ·...
-
Page 29: Fmi Overview
It is a floppy drive device used for system maintenance, which can be loaded into DOS system by factory default. Users can change the purpose of eDisk based on their requirement, for example, saving users’ private data or EVOC One-Button-Recovery system eBack software. eLogo It provides an effective, simple and reliable way for users to replace OEM LOGO of the PC. -
Page 30: Emanager Software
OEM Logo for the user automatically. 6.3 eManager Software eManager software is a device management platform software developed by EVOC. eManager software can be used for system operation abnormality monitoring, setup of GPIO input/output mode and electrical level, real-time monitoring of temperature, fan and voltage status. -
Page 31: Function
Watchdog. Exiting the program when Watchdog is counting down will also stop Watchdog. If “Automatically feed watchdog” option is selected, when the counted time is less than 3 seconds, Watchdog will be automatically fed. Function: Monitors whether the system can be normally operated, and carry out reset · 24 · NPC-8220... - Page 32 Software Introduction for abnormality. When abnormality occurs to the system, Watchdog cannot be fed automatically. After counting-down is finished, the system will restart, and recover from system error. 3、GPIO NPC-8220 · 25 ·...
- Page 33 “Setup” button on the right. If it is a network-type motherboard, the special LED of the motherboard will also be displayed and can be set up. Function: Setup of GPIO and Network LED · 26 · NPC-8220...
-
Page 34: Firmware Management
Method: After the software switches to hardware detection interface, it will automatically acquire temperature, fan speed, voltage and other information, refreshing at a 2S interval. Function: real-time acquisition of hardware operating status. 6.3.3 Firmware Management 1. HDD SMART NPC-8220 · 27 ·... - Page 35 HDD performance will be displayed in the list box. Function: To check SMART information related to HDD performance, which helps predict service life of HDD, and avoid data loss caused by damage to HDD. 2. Boot-up time · 28 · NPC-8220...
- Page 36 The user can directly use eManager software for management of the device. If users intend to program software by themselves. Please refer to the complete routine of VB, VC, C++Builder, Delphi and BPI Programming Interface Operation Manual in the enclosed CD. NPC-8220 · 29 ·...
-
Page 37: Installing Expansion
Use hand to pull the handle of cover lock upward, the chassis cover will move along the direction of arrow, until the handle cannot be moved. Pull the chassis cover upward, to disengage the chassis cover from the chassis body. · 30 · NPC-8220... -
Page 38: Installation And Removal Of Cfast Card
Please see the “ESD Guideline” for regulations related to operation of ESD-sensitive components. Installing CFast card Installation steps Insert the CFast card, and use screws to fasten the CFast card bracket. Use sunkhead screws to fasten the CFast card module. NPC-8220 · 31 ·... - Page 39 Loosen the screws on CFast card bracket and pull it out in the direction shown in the picture. Caution If the CFast card meets obstruction, reverse it and try again. Do not insert the CFast card by force. · 32 · NPC-8220...
-
Page 40: Pc Maintenance
To maintain relatively high system availability, it is recommended to preventatively replace the quick-wear parts. The table below give the time interval for replacement: Assembly Time Interval for Replacement 3 years CMOS backup battery 5 years NPC-8220 · 33 ·... -
Page 41: Replacing Backup Battery
3. Disconnect the PC from power source. Replacing Battery Steps to replace battery Open the PC Remove the motherboard. Note: place the motherboard on a desktop with anti-electrostatic protection. Press the clamp which fasten the battery, and remove the battery · 34 · NPC-8220... -
Page 42: Installing The Drivers
When driver program cannot be installed, for example a yellow question mark or exclamation mark appears, it is recommended to install latest patch package of corresponding operating system, or directly install the operating system of latest release version before installing the driver program. NPC-8220 · 35 ·... -
Page 43: Dimensions Drawing
This section includes the following dimensions drawings: Product Outline Dimensions Drawing Product Installation Dimensions Drawing Note: The unit in the dimensions drawing is usually millimeter. 9.2 Product Outline Dimensions Drawing 88.1 88.1 482.6 4x10.3 4x6.8 Unit: mm · 36 · NPC-8220... -
Page 44: Installation Dimensions Drawing
Dimensions Drawing 9.3 Installation Dimensions Drawing 9.3.1 Product Installation Dimensions Drawing 482.6 4x10.3 4x6.8 Unit: mm NPC-8220 · 37 ·... -
Page 45: Appendix
2. Please check whether the Power cable or display display cable correctly cable is not connected connected with the display and the system unit. 3. Contact Technique Support if the screen remains black after implementing above measures. · 38 · NPC-8220... - Page 46 No system disk can The HDD power cable disk (the hard disk shall be found when or data cable is not installed with operating system powering on connected well bootable) well connected. NPC-8220 · 39 ·...
-
Page 47: Common Alarm Information Analysis And Solution
Award BIOS motherboard. During Power The motherboard or complete PC is On Self Test (POST), the screen displays not connected to PS/2 or USB error information: “Keyboard error or no keyboard, and keyboard needs to be keyboard present”. connected properly. · 40 · NPC-8220... -
Page 48: Esd Guideline
ESD current may lead to potential problem of the module, or damage to the m odule which is not serious for the momen t but may cause fault during operation. NPC-8220 · 41 ·... - Page 49 In this way, the dissipated electricity will not affect the ESD-sensitive device Before handling the module, dissipate the electrostatic charges on your body. The can be dissipated by cont acting grounded metal part. Make sure to use grounded measuring instrument. · 42 · NPC-8220...
-
Page 50: Abbreviations
PC power consumption. Automation System After-sales Information ASIS System Advanced Technology Advanced Technology Attachment Advanced Technology Extended An America standard to American wire gauge differentiate wire diameter BIOS Basic Input/Output System BIOS code Controller Area Network NPC-8220 · 43 ·... - Page 51 Clear to Send Clear to Send Dynamic Random Access DRAM Memory Direct Current Direct Current Data Carrier Detect Data carrier signal detect Direct Memory Access Direct memory access Operating system without Disk Operating System graphic interface · 44 · NPC-8220...
- Page 52 Enhanced IDE drive Extended Industry Standard EISA Extended ISA standard Architecture Expanded Memory Manager To manage expansion of memory Extended Memory 64 EM64T Technology European Norm Electrically Programmable EPROM/EEP sub-module Read -Only Memory/ EPROM/EEPROM chip Electrically Erasable NPC-8220 · 45 ·...
- Page 53 HyperText Mark-up Script language used to create HTML Language Internet page Data transfer protocol on the HTTP Hypertext transfer protocol Internet Hardware Hardware Input/Output Data input/out of the computer Intel(R) Application Accelerator Integrated Drive Electronics International · 46 · NPC-8220...
- Page 54 Low-Voltage Differential LVDS Signaling Drive Media Access Control Media Access Control Memory card in credit card Memory Card format Machine-readable product MLFB designation Micro Memory Card 32*24.5mm format memory card Multiple Point Interface Used for Programming NPC-8220 · 47 ·...
- Page 55 Non Maskable Interrupt Interrupt cannot be refused New Technology File Safety file system of Windows NTFS System version (2000, XP, Vista) Optical Disc Drive Standardized interface OLE for Process Control industrial process PATA Parallel ATA Personal PC · 48 · NPC-8220...
- Page 56 Random Access Memory Ringing Input Call in Read-Only-Memory Two-way bus system designed to RS 485 Reconciliation Sublayer 485 be used for up to 32 nodes Real Time Clock Real Time Clock Reliable Transmission Request to send Service NPC-8220 · 49 ·...
- Page 57 Synonym to parallel port Static Radom Access SRAM Static RAM Memory Solid-State Drive Enhanced VGA standard using at SVGA Super Video Graphics Array least 256 colors Serial number of the device Software Total Cost of Ownership · 50 · NPC-8220...
- Page 58 V.24 transmit data by serial port Positive supply voltage integrated circuit Verein deutscher Elektrotechniker (Prufstelle Testing and Certification Institute) Video adapter which meets Video Graphics Array industrial standard Voltage Regulator Module Virtualization Technology Simulated closed environment NPC-8220 · 51 ·...
-
Page 59: Terminology Glossary
RAM, containing a routine area to control status and a command list. APIC Mode Advanced Peripheral Interrupt Controller, with 24 interrupt lines in total. ATAPI CD-ROM Drive AT Attachment Packet Interface (connected to AT bus) CD-ROM drive. CE Mark · 52 · NPC-8220... - Page 60 Local Area Network: LAN means local area network, which contains a set of computer and other devices distributed across relatively limited scope and connected by communication cable. The devices connected to LAN are called node. The purpose of network is to share files, printers and other resources. NPC-8220 · 53 ·...
- Page 61 The association is composed of about 450 company members in the computer industry. It focuses on providing international standards for miniaturization and flexible use of device expansion card, so as to provide basic technology for the · 54 · NPC-8220...
- Page 62 ROM refers to Read-Only Memory. It can separately search each storage address. The program or data are permanently stored, so they will not be lost when power failure occurs. NPC-8220 · 55 ·...
- Page 63 Wireless LAN is mainly used for portable PCs in offices or factory environment. Backup Copies of programs, data media or database, use to keep or protect key, irreplaceable, data, and prevent data loss when damage to a working copy occurs. Some application · 56 · NPC-8220...
- Page 64 Traditional drive can be used as USB device. Memory Card Memory card of credit-card format, the storage to store user programs and parameters (e.g. programmable module and CP). Reset Hardware reset: Using button/switch reset/reboot device. Formatization NPC-8220 · 57 ·...
- Page 65 Logically, EFI is located under the operating system, and is successive specification of device BIOS, mainly targeting 64-bit system. Controller Controller integrating hardware and software to control certain internal or peripheral devices (e.g. keyboard controller). · 58 · NPC-8220...
- Page 66 (onboard or slot module) and at least two SATA detachable supports. The advantage of hotswap is that faulty hard drive can be replaced without having to reboot the PC. Dual-core CPU Compared with last-generation single-core CPUs using hyper-threading technology, NPC-8220 · 59 ·...
- Page 67 Warm boot the computer (Ctrl + Alt + Del) without disconnecting power source. Motherboard Motherboard is the core part of a computer. Motherboard is used to process and store data, control and manage ports and device I/O. · 60 · NPC-8220...
Need help?
Do you have a question about the NPC-8220 and is the answer not in the manual?
Questions and answers