Teac AI-301DA Owner's Manual page 13

How to connect speakers
1
Turn the terminal cap counterclockwise to
loosen it. The speaker terminal caps can-
not be fully removed from the unit.
2
Insert the wire into the terminal and turn
the terminal cap clockwise to securely
connect it:
o Make sure none of the wire insulation is under
the terminal and only the bare, stripped wire is
touching the terminal.
3
Confirm that the cable is fastened
securely by gently pulling the cable.
Connecting with banana plugs
You can also make connections using commercial-
ly-available banana plugs. First, connect the banana
plugs to the speaker cables and then connect the plugs
to the terminals.
o Keep the caps tightened when in use.
o Carefully read the instructions for the banana plugs
that you are using.
13