Audio Adjustments - Pioneer DEH-3200UB Operation Manual

( Operating this unit
Section
)CD
The playback speed of audiobook can be changed.
Press
Moe.
to display the setting mode.
~L
Turn
M.e.
to select your favonte setting.
• Faster - Playback faster than normal speed
• Normal-
Playback in normal speed
• Slower -
Playback slower than normal speed
W
Press
Moe.
to confirm the selection.
• Refer to
SoRtrv (sound retriever)
on page 11.
_Notes
• Operation is complete even if the menu is can-
celled before being confirmed.
• Switching the control mode to
iPod
pauses
song playback. Operate the iPod to resume
playback.
• The following functions are still accessible
from the unit even if the control mode is set to
iPod.
- Volume
- Fast forward/reverse
- Track up/down
- Pausing
- Switching the text information
• When the control mode is set to
iPod.
opera-
tions are limited as follows:
- Only
CTRL
(control mode),
Pause
(pause)
and
S.Rtrv
(sound retriever) functions are
available.
- Browse function cannot be operated from
this unit. ~
Audio Adjustments
1 Press M.e. to display the main menu.
2 Turn M.e. to change the menu option
and press to select AUDIO.
3 Turn M.e. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
IT:
Press
M.e.
to display the setting mode,
l[
Press
M.e.
to cycle between fader and balance.
Turn
M.e.
to adjust the speaker balance,
Adjustment range (front/rear): F-F15 to F-R15
Adjustment range (left/right)
B-l15 to B-R15
• F-O
is the proper setting when only two speak-
ers are used,
• When the rear output setting is SUBW, you
cannot adjust front/rear speaker balance,
Refer to SW control (rear output and subwoo-
fer setting)
on page 15,
~_
Press
Moe.
to display the setting mode.
2
Turn
M.e.
to select an equalizer curve,
Powerful-Natural-Vocal-Custom 1-Cus-
tom2-Flat-Super bass
• When Flat is selected no adjustments are
made to the sound.
; 3.
Press
Moe.
to confl rm the selection,
You can adj ust the cu rrently selected equal izer cu rve
setting as desired, Adjusted equalizer curve settings
are memorized In
Custom1 or Custom2,
• A separate
Custom1
curve can be created for
each source. If you make adjustments when a
curve other than
Custom2
is selected. the equali-
zer curve settings will be memorized in Custom1
• A Custom2 curve can be created common to all
sou rces, If you make adJ ustments when the Cus-
tom2
curve is selected, the
Custom2
curve will
be updated.
IT:
Press
Moe.
to display the setting mode,
LL Press
M.e.
to cycle between equalizer band and
level.
cl
Press
Moe.
to sWitch to equalizer band and then
tu rn
M.e.
to select.
100Hz-315Hz-1025kHz-3.15kHz-8kHz
r4 Press
Moe.
to sWitch to level and then tu rn
Moe.
to adjust.
Adjustment range:
+6 to-6
Loudness compensates for deficiencies
In
the low-
and high-frequency ranges at low volume,
Press
Moe.
to display the setting mode,
l[
Turn
Moe.
to select the deSIred setting,
OFF (off)-low (low)-Mid (mld)-High (high)
-3-
Press
M.e.
to confirm the selection
En
m
:::s
CC
-
_ .
C/I
::::r